anybody with any exta q jets/parts laying around

[judge_jury_executioner_69]

i tried to post this under parts section with no luck. i need the "y" fitting that screws into the back of the carb. im not sure about the sizes of each end or where it screws into but 1 is a vac line for the brakes ( the bigger end ) and 1 is for the tranny ( smaller end ) does anybody have any laying around they want to get rid of or know of a site or something where i can get a hol dof one?

[judge_jury_executioner_69]

i tried to post this under parts section with no luck. i need the "y" fitting that screws into the back of the carb. im not sure about the sizes of each end or where it screws into but 1 is a vac line for the brakes ( the bigger end ) and 1 is for the tranny ( smaller end ) does anybody have any laying around they want to get rid of or know of a site or something where i can get a hol dof one?

[Paul Spotts]

you do not need the original. you can get an 1/8" pipe nipple and an 1/8" "T". The power brake fitting will be a 1/8" npt and 3/8 nipple. The trans is a 1/8" npt and 1/4" nipple

[BVR421]

ACE hardware plumbing section has stuff that nearly perfectly suited my needs everytime I have needed such items. Most of it brass and low$$$

[VCho455]

I have one of the fittings your looking for. $10 with shipping or what do you have to trade. I'm looking for 2nd gen firebird trinkets. Or maybe a set of 141 heads.

[judge_jury_executioner_69]

nothing to trade all i have is go fast parts that im gonna use