PDA

View Full Version : 67 Bonneville what should I do


BradZZ
08-04-2003, 08:44 PM
I've just gotten a 67 2-dr w/ a 400 xw th400
non-air car, bench seat. The car is very poor condition!
The whindshield and dash need to be replace
both Qtrs are rusted out. dvr fndr and pass door have dents
floors and trunk are good.
What yrs interchange with this body for the glass
and dash. and what yrs interchange with 67 body parts?
Thanks
Brad in Louisville

BradZZ
08-04-2003, 08:44 PM
I've just gotten a 67 2-dr w/ a 400 xw th400
non-air car, bench seat. The car is very poor condition!
The whindshield and dash need to be replace
both Qtrs are rusted out. dvr fndr and pass door have dents
floors and trunk are good.
What yrs interchange with this body for the glass
and dash. and what yrs interchange with 67 body parts?
Thanks
Brad in Louisville

Txbobcat
08-05-2003, 05:07 AM
The quarters and dash pad will be near impossible and expensive to find. The doors I believe will fit from a 65 to 69. They were great cars but sounds like this may be a money pit that you will never recover from. Nice 67's can be had for 3 to $4000 so count your money before restoring.

1970cat
08-05-2003, 05:07 PM
not sure about the glass , but the dashes come up on ebay from time to time ,quarter panel most likely will have to be used from out west ( expensive with shipping). not sure about the fender , but the nose is 67 only.

robert strohrigl
08-06-2003, 07:31 PM
you cant find patches for the q-ers?

ALL AMERICAN PONTIAC LOVER

BradZZ
08-06-2003, 10:14 PM
Doesn't JCWhitney sell Qtr patch panels
this wouldn't be a show car!
will the chevy implala interchange windsheild?

BradZZ
08-07-2003, 07:52 PM
Daaa
This is a non-air car how do you turn on the heater fan and select defrost and heat
I see the dials to the left of the radio
the one on the right controls temp?
how do I operate left knob? turn push pull?

robert strohrigl
08-07-2003, 08:19 PM
hey brad
ytou turn up til the red goes higher
its not coming on at all
you off tomm

ALL AMERICAN PONTIAC LOVER

bonneville Joe
08-08-2003, 06:19 AM
Any auto glass shop should have new front windshields. I have had 2 on my '66s replaced.

_____________________________
Foolproof and Sucka free since 1979.


http://www.deanguitars.com/psupload/pics/batmobile.gif

Coach
08-08-2003, 03:04 PM
I have a couple of the parts you need. I have a complete dash board, but not the top pad, and I have both doors. Drop me a line if you are interested.

The windshield is easy, any auto glass place will be able to get you one, I even found a tinted unit for my '67 convertible.

Can't help with the qtrs.

Good luck,
-harry

1967 Grand Prix Convertible Project

BradZZ
08-09-2003, 07:37 PM
found a tinted windshield
outta 66 Delta88
Old guy running the yard said 65-68 from a Caddy,Olds,Pontiac or any big car would work!
Of course it started to rain as soon as I got home
Any help on Heater Controls? Are they Vac controled?