69 canadian pontiac 2+2 convertiable

[bighunny]

Does any one know anything about the 1969 Pontiac 2+2 Canadian model I know that they are rare but nobody seems to know what other makes or models will fit the car is in great shape body wise the floor and trunk are bad os I need all floor and trunk pansI am looking for any info I can get .Thanks

1969 2+2 convertible help

[bighunny]

Does any one know anything about the 1969 Pontiac 2+2 Canadian model I know that they are rare but nobody seems to know what other makes or models will fit the car is in great shape body wise the floor and trunk are bad os I need all floor and trunk pansI am looking for any info I can get .Thanks

1969 2+2 convertible help

[1970cat]

don't have the exact information , but i know the cars were a mix of pontiac and chevy components. i'm 90% sure that the body is pontiac.

[engineer]

try this for a starting point and then go through the links section to see if you can find out more detail. http://www.classiccanadianbeaumonts.com/links.htm

if you give us a picture of the car I might be able to help. I have a Canadian Master Parts catalog for Pontiacs.

[CDN2PLS2]

"632" convertible 2+2z built in '69

http://www.elmrij.net/~mjmshodge/plate.jpg

[1970cat]

might try searching the web for the 69 pontiac b-body site. the deal almost exclusively with the 69's including the canadian models. i was going to put a link but couldn't get the page to open. maybe they are having serever problems or something.

[26667]

I would look at Chevy for trunk floor. Wheelbase was same as Impala models (quarters would be exclusive Canadian Pontiac, Should you ever need them!)

[68 Prix]

try this site http://www.canadianpontiac.ca/
If I understand every thing correctly that I have learned about these cars they sat on Chevy frames and used Chevy drive lines including suspension. If you want I know of a guy who has a 67 2+2. E-mail me and I can get you in touch with him.

[bighunny]

http://car Sorry I was away for a couple of days .I tried the 69 pontiac page and asked the question to a few people one fellow has the same car but doesn't know where to get parts or what other kind of parts will fit .I got a hold of GM they sent me 100 pages or so of stuff but nothing about my car. I suspect that the car wasn't suppose to be on the market there was only 12 made for showrooms or so I have been told I guess 7 convertiables 5 hard tops. I don't know if this info is right or wrong.

1969 2+2 convertible help

[1970cat]

sounds like you will need to find someone with a canadian pontiac parts manual or interchange book. might want to find an old and friendly salvage yard near you and see if they will look up the interchange information for you.

[CDN2PLS2]

What's the powertrain in that car?? I have a'69 Caprice and a '69 2+2 and there is almost no sheetmetal that's going to interchange
632=convertibles
1943=hardtops

http://www.elmrij.net/~mjmshodge/plate.jpg

[bighunny]

I have a interchange book but the cars were never supose to be on the market or so I have been told. And there is no info in any books I checked most scrap yards don't have any info on old cars GM said that there were only 12 cars of this model made.http://car

1969 2+2 convertible help

[bighunny]

http://wpe27

1969 2+2 convertible help

[CDN2PLS2]

So is yours a 427 4speed?????

http://www.elmrij.net/~mjmshodge/plate.jpg

[bighunny]

NO mine is a 350 astro flash v8 with a 3 speed th350 trans but that should not have anything to do with finding floor pans should it?

1969 2+2 convertible help

[CDN2PLS2]

What that letter states is thats how many 2+2z were built with 427 and 4speed.I know where three of them are.What do you mean not supposed to be on the market?They were in all the brochures.I've seen lots of them over the years.

http://www.elmrij.net/~mjmshodge/plate.jpg

[bighunny]

I was only saying what I was told by people in other forms that I have been checking out. I never had a reason not to belive it because no one could ever tell me any info on the car they were guessing like most forms I have been checking out .The letter was sent to me from someone who found it in some form he was serching .The 100+ pages I got from GM didn't have any info on that model. You say you know where there are three? SO where can I order parts?or what other parts are close to the same ?

1969 2+2 convertible help

[1970cat]

been checking the web and most of the sites that might contain information about your car don't seem to be working. i did find www.gmcanada.com (http://www.gmcanada.com) , www.canadianpontiac.ca (http://www.canadianpontiac.ca) , and www.autonet.ca (http://www.autonet.ca). from your picture the car appears the same as a catalina or bonneville. there are some trim differences that i can see , but the basic shape of the body appears to be the same. you might want to try www.amesperf.com (http://www.amesperf.com). they list floor pans for 69-70 full size. they also list the trunk pan , but i emailed them about this for my own car ( 70 catalina convertible) and they said that their deal with the person reproducing them fell through and that they had no plans to reproduce them in the future. good luck , and let me know if you find any sources for the body panels as i too have been looking for some time.

[CDN2PLS2]

I know where 3 of the 427 4 spds are !!For parts you'll need a Laurentian or Pariesiane doner car.The american car might look the same but the dimenstions aren't.

http://www.elmrij.net/~mjmshodge/plate.jpg

[bighunny]

OK I just got a email from antiquechev.com. The (1969 IMPALA) floor and trunk pans are the same as mine but they can't can't help with body parts no listing. So I guess I got what I needed I just wanted to thank everybody for all there help keep up the good work. THANKS AGAIN

1969 2+2 convertible help

[CDN2PLS2]

There is a '69 2+2 convertible on E-BAY right now.Not too far away.

http://www.elmrij.net/~mjmshodge/plate.jpg

[1970cat]

you beat me to it. i was going to post it myself. http://forums.performanceyears.com/groupee_common/emoticons/icon_wink.gif69 2+2 (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=6418&item=2460808019)

[engineer]

based on the ebay pictures, contact me about your car, as I have a copy of the Canadian Master Parts book but it looks to me like the Pontiac body parts will all fit as well as the chevy parts when it comes to floor pans and trunk floors.