Pacific Performance Racing

[Admin5]

Pacific Performance Racing Ken "Ace" Brewer
San Pedro, CA
310-832-4596

List your good or bad experiences as a response. As always be fair and professional. Beware.... Slander or unsubstantiated claims or greivances could be grounds for legal action.

If you would like to add a business, individual, club, association....etc. Please e-mail Performance Years.

[Admin5]

Pacific Performance Racing Ken "Ace" Brewer
San Pedro, CA
310-832-4596

List your good or bad experiences as a response. As always be fair and professional. Beware.... Slander or unsubstantiated claims or greivances could be grounds for legal action.

If you would like to add a business, individual, club, association....etc. Please e-mail Performance Years.

[David Holmberg]

Ace has helped me with two different cams, a problem with my support truck and other misc things and I have not spent a dime with him "YET". A straight shooter, Can't wait for the race motor project to start so I can send him some money. Thank you ACE for all of your help.

[Big Injun]

Ken has been racing with Pontiac Drag Days since our origins and since he opened Pacific Performance Racing, he has also been a sponsor. Ken is working hard to bring us Pontiyakers some new parts and is currently opening a new retail store front packed with inventory.

The racers and Competition Committee of Pontiac Drag Days thanks you for your support.

------------------
www.PontiacDragDays.com (http://www.PontiacDragDays.com)
Dave "Big Injun" Anderson

[Guy Mazza]

Ace has helped me out many times.parts,service,technical...all top notch!Thanks PPR for all the help and sponsorship of Pontiac Drag Days.I highly reccomend PPR! Thanks,Guy O.P.R.A.

[RR67GTO]

I wish he would note on his web page when parts he has listed are not made yet. Or, are not in stock. He's a great guy, but I've had problems when I've placed orders with him via his web page. IN fact, every time. So, I call for parts, but again some times what he has listed is not in stock. Or worse yet, not even made yet. And that takes time from people trying to plan engine builds. A simple note saying out of stock, not sure when available. Or, coming soon. My last attempt was to buy a new roller cam with the 4-7 swap. Listed with a price on the web page. And a set of the roller lifters. but when I placed my order. And never received a response, a call to him confirmed they were not yet made. So, send me the roller lifters, and after saying they were shipped, two weeks passed and I called. Not shipped, I was mistaken for someone else. I got them a week later and were fine. In the mean time I had to buy the cam and other items from other vendor. I would still use them, but be more insistent on the facts of the availability of items, before I count them and place an order. Time, is money. :)

Mike

[aubi65gto]

Ken Built my 462, while I was deployed to Iraq. He was always willing to work with me, and is a first class dude. Couldn't be happier with the power, reliability, and quality of his work. A huge deal having him there for us stuck on the "left" coast.

[66 joe]

Ace built my 455 bout 2 years ago and I couldnt be happier. Good communication through build and continued support after. Highly recommended especially on West Coast!
Joe

[Johnny406]

Another thumbs up here, I have bought quite a few parts from him.

[67blackcherry]

A great guy, he's given me tonsof free tech advice for years; when it comes time to rebuild my GTO, it's going to him.

He referred me to a business for a carb tune; said business was a complete tool. I called Ken (to give him a head's up, not a WTF); Ken was very apologetic and thanked me for the head's up.

[Thomasmoto]

Dealt with him twice. Both were great experiences and I'm on the east coast.

[PunchT37]

Bought a few things from him. Good dude. Good for the Pontiac community.

[tstevea]

Dealt with Ace good guy, my buddy purchased his rockershaft setup and Ace sent all the chims needed till he got it all set up,stood behind him the whole way.

[BVR421]

He's a doofus but I go to him every time, real straight shooter. He returns calls and no BS!

[wheelspin]

Dealt with Ace good guy, my buddy purchased his rockershaft setup and Ace sent all the chims needed till he got it all set up,stood behind him the whole way.

Another positive reference for Ken & PPR: I recently completed a performance upgrade on my 66 GTO's engine that includes KRE heads, Torquer II intake, roller cam and lifters, and Ace's well-engineered and inexpensive Tomahawk shaft rocker setup. Ken was very helpful on the conversion and had all of the parts that I needed to complete the changeover in stock. Ken is to be commended for continuing to develop competitive performance parts for our Pontiacs.

Thanks Steve for your buddy's phone number; it was very helpful to talk with him regarding his Tomahawk shaft rocker experience.

[Half-Inch Stud]

Ahem,
Bought a Tomahawk Manifold from "ACE" , was fine, yet he had a lisp.

Then,
Bought a set of 5140 Rods from "ACE", was super, they fit great & are working fine yet, he had a lisp.

Recently,
Bought a Tomahawk (Isky) Cam from "ACE", looks great, but his lisp is gone. All I can figure is that I changed cellphones. Great to speak with Ken Brewer & do recommend his products and APPLICATION ADVICE. HIS

[6t7goat]

Just bought a Tomahawk cam and lifters from Ken. He talked to me three different times before the purchase and gave me lots of good info. He is an easy guy to talk to. Only issue was no cam card in the box but he faxed one right away. When I get the engine together I will post the dyno results for the cam with my combo.

[6x400gmc]

Spoke to him today for twenty minutes on the phone asking about a bottom end for my 455. Super cool guy, easy to talk to, and I hung up having already made my decision to send my $$ his way.

It was awesome that he took the time to answer the most basic of questions, and suggest parts that I needed, not overkill pieces that I did not.

Thanks!

Britt

[Ron]

Ace always gets two thumbs up.

[raidex1]

I just bought a crankshaft from Ken on the advice of my friends at the Inland Empire GTO Club. I enjoyed our visit there and found Ken an honest and very informative man.
Rick

[6x400gmc]

Pulled the trigger on my purchase of a 4" stroker kit. Went ahead and got all the usual accessories while I was at it. ( oil pump, valve covers, gaskets, etc.. ) Ken is an amazing guy, very helpful, and the amount of effort he put into packaging everything up was outstanding. Nothing broken or bent up, and I think half the shipping weight was in newspaper.

Next engine build I do will be with PPR parts. No doubt.

Thanks Ken!

Britt

[67rstbkt]

I purchased a cam and balancer from PPR; great experience overall. I will definitely buy from them again. Thanks Ken

[72blackbird]

I've bought parts and had engines machined through PPR for a few years now- Ace is always friendly, informative, and extremely knowledgeable when it comes to engine building.

I was shocked to hear that Ace no longer offers engine building services, but he will still continue to sell just about everything you'll need to put together a high performance Pontiac V-8, and be an excellent source of information when it comes to building pontiacs.

[Big Injun]

I've bought parts and had engines machined through PPR for a few years now- Ace is always friendly, informative, and extremely knowledgeable when it comes to engine building.

I was shocked to hear that Ace no longer offers engine building services, but he will still continue to sell just about everything you'll need to put together a high performance Pontiac V-8, and be an excellent source of information when it comes to building pontiacs.

Ken is a one man band with some help from his Mom on the phones. His business has grown and he appreciates the support provided by the Pontiac hobby. With his parts business flourishing he has pulled back on production work. He greatly enjoys specialized builds and has decided to manage but a few of these types of builds per year while at the same time working to expand his product lines for all of us Pontiyakers.

[67blackcherry]

I've bought parts and had engines machined through PPR for a few years now- Ace is always friendly, informative, and extremely knowledgeable when it comes to engine building.

I was shocked to hear that Ace no longer offers engine building services, but he will still continue to sell just about everything you'll need to put together a high performance Pontiac V-8, and be an excellent source of information when it comes to building pontiacs.

When did that happen???

[Ken -Ace- Brewer]

Thanx for all the praise guys. By choice I have basicaly stopped accepting anymore jobs. I have a couple of things I am working on. :-)
I will accept select motors. But not many.

Ace

[mudbird]

Great guy and excellent customer service! Always returned my calls and did what it took to fix a problem that was not really his fault.
Great to have for our Pontiac community!

[old66tiger]

FWIW, I called a few times and left a message asking for him to call me back he never returned my calls. I ended up buying from SD or Butler.