looking for a few good shops in the Ft Worth/Dallas area

[genrllee]

I'm just starting my project and I'm mainly concerned about

1 sand blasting my frame
2 powder coating the frame
3 rebuilding the rear end
4 rebuilding the transmission

also looking for a 389 long block. i found one at billionsandtrillions.com but after reading these forums I'm a little hesitant.

if you have dealt with some good people in my area please let me know about them. word of mouth is the best advertising.

[pontiac poncho]

I'm just starting my project and I'm mainly concerned about

1 sand blasting my frame
2 powder coating the frame
3 rebuilding the rear end
4 rebuilding the transmission

also looking for a 389 long block. i found one at billionsandtrillions.com but after reading these forums I'm a little hesitant.

if you have dealt with some good people in my area please let me know about them. word of mouth is the best advertising.

Howdy! I can help you with just about everything.
Shoot me an email,
[email protected]

[61-63]

Genrrlee you need to join the POCI chapter in the D/FW area. It is full of knowledgeable Pontiac people who could tell you who to see (and avoid) in getting your work done; Ed Giolma, Brad Duerst, a bunch of 'em. All trouble makers (kidding).

That is if the poster just ahead of me doesn't answer all your questions.

[genrllee]

Genrrlee you need to join the POCI chapter in the D/FW area. It is full of knowledgeable Pontiac people who could tell you who to see (and avoid) in getting your work done; Ed Giolma, Brad Duerst, a bunch of 'em. All trouble makers (kidding).

That is if the poster just ahead of me doesn't answer all your questions.


do they have a web site or someplace i can go. like a monthy gathering?

[61-63]

Winston McCollum is the President of the D/FW chapter. He is in Plano and his number is 214-274-6018. If you aren't a member of POCI you can join on their website which is at www.poci.org