Pay it forward

[gobrdgo]

I have a 4150 holley nitrous plate to give away. You pay shipping (should be dirt cheap). If you claim it you gotta offer up something to give away yourself. I'm not asking for a trade, just offer something up to whoever responds first.

[David Holmberg]

That's a cool way to do something, I wish I needed one.

[ponjohn]

I dont need it but I do have a first gen f-body 8.2 rear for free. 2.73 open, no brakes. You pay frt.

John

[Jagtec1]

I've got some front drum brake spindles, drums, and backing plates....free if shipping is paid! For a 69 A-body.

[Mike S]

Darin,
I might be intrested in those drum spindels if they fit on a 67.
I have back glass and quarter glass from a 67 GTO.
Mike

[Jagtec1]

Mike, if you want 'em, they are yours! Need anything else? Anyone? I've got some stuff laying aroound I need to get rid of.

[gobrdgo]

Great I am glad to see some more parts circulating.

[ponjohn]

How about getting David to make it a sticky for free stuff post here?

[gobrdgo]

sounds like a good idea to me.

[Trans-Formula II]

I agree, I just scrapped a good Lemans hood and a 65 GTO deck lid that no one wanted. Wish I could have given them to someone who needed them instead.

[SergeF]

I am about to throw away 72 ventura new low miles 3 row radiator and 8.5 rear 2.73 gear set. Radiator might fit 67-79 firebird also. If anyone want them let me know.

[Brian '74]

I have a '68 250 OHC shortblock someone can have for free. Had it listed here for months, maybe someone will read this

[vidguy]

The 66 GTO Passenger Fender I have For Sale... IT's free if you pay for shipping or pick it up!

[WARPed]

I am about to throw away 72 ventura new low miles 3 row radiator and 8.5 rear 2.73 gear set. Radiator might fit 67-79 firebird also. If anyone want them let me know.


That 8.5" rear will bolt right in to a 1st gen bird

[firebirdcrazy1959]

Its nice to see someone else doing this.I like to give free stuff i don't need.Anyone want a 69 10 bolt rear housing from a tempest??

[ponjohn]

I also have a st300 FREE.

[60man]

I have a ST 300 tranny also, Pick it up & it's yours

Also have two(2) 59-64 4 speed HydraMatics...Pick up also..

I would not have a clue how to ship them.......

[gobrdgo]

I can't give away a nitrous plate, I'm surprised.

[242177P]

The nitrous plate would look cool just hanging on a wall, but I'm going to leave it for someone who can actually use it.

66 Tempest bench if anyone wants one...

[Mr-Bratt]

Funny how this may? work now, But evrytime I TRIED TO GIVE stuff away it only gave me grief??? I Put more stuff in the dumpster than most could use, I do hope this works out, As I have lots of FREE items but I refuse to list till I see where this goes, otherwise spring cleaning is dumpster time... And yes I am bitter, since when I offer items for FREE! someone always wants me to ship and or pay for shipping, yeah right, I guess as Ray "might say" pontiac parts are falling off of the trees...LOL right Ray?

[Colin]

I can't give away a nitrous plate, I'm surprised.
I will take it......let me see if I can find something to post here to give away.
Let me know what shipping is and method of payment.
Thanks, Colin

[kookykrispy]

I have a 4150 holley nitrous plate to give away. You pay shipping (should be dirt cheap). If you claim it you gotta offer up something to give away yourself. I'm not asking for a trade, just offer something up to whoever responds first.

I'll take it and I'll pay shipping to 87106


I have a BOP th400 long shaft trans. Condition unknown, good core. Free. Pickup or pay shipping.

I agree, I just scrapped a good Lemans hood and a 65 GTO deck lid that no one wanted. Wish I could have given them to someone who needed them instead.

Aw man!!! I would have taken that hood! I need a flat hood for my '67 to cut for my blower. I'm not going to cut up an original gto hood.

[Teej]

I've got a bench seat from a 67 Tempest wagon I'd let go if somebody needs one.

[gobrdgo]

Colin, paypal $5 to amsando@socal.rr.com or snail mail J Plourde 1597 N morningside st Orange Ca 92867 If it costs any less to ship I'll stuff it in the box. Kooky if colin passes it's yours! Thanks

[Pontiacmuscle]

Id love to have that Ventura Radiator. I have a Brand New Mr Gasket Chrome 10 Bolt Rear Diff Cover In Da Box to Offer Up

[Colin]

Colin, paypal $5 to amsando@socal.rr.com or snail mail J Plourde 1597 N morningside st Orange Ca 92867 If it costs any less to ship I'll stuff it in the box. Kooky if colin passes it's yours! Thanks
If Kooky needs one he is welcome to it........I just figured it couldnt hurt to have an extra one around, I dont need it really.
If Kooky doesnt want it I will certainly take it though.
Colin

[gobrdgo]

Hey Kooky it is what it is.

[66_GTO]

Id love to have that Ventura Radiator. I have a Brand New Mr Gasket Chrome 10 Bolt Rear Diff Cover In Da Box to Offer Up

I'll take the chrome diff cover off of your hands! PM me with info.

I'll look through my spare parts boxes that came with my GTO and see what I've got to give away to help out some members :D

[Pontiacmuscle]

1 and 2

[71SportRagtop]

I'm getting my garage cleaned out for spring, here's some items that I want OUT!! Free to whoever wants them....

1 pair 4X-4H heads, press in studs from a 73 400 2bbl motor, VERY dirty, pick up in Philly suburbs...I don't want to ship these

1 cast iron 2bbl intake manifold from 73 400 2 bbl motor...dirty

1 factory oil pan from the same 73 400 motor...VERY dirty

1 chrome 2 gauge mounting bracket for 2-5/8 gauges..new

2 blue Pontiac rubber floor mats new condition

I can email pics if anyone wants this stuff....free, you pay shipping

[ponjohn]

Solid rot free trans xmemebr for hardtop 69 a-body. No end straps or rubber mounts.

Free if you pay frt, I have had this advertised too many times to count.

John

[my69gto]

Ponjohn,
How different is a hardtop xmember from a convertible? I have a ragtop and I could use a better one than I have as mine's been welded... If it will fit I could probably pick it up depending where you are in CT...

Dave

[ponjohn]

I dont know how much different they are but they are not the same.

john

[Teej]

71...I'll take the floor mats. They'll be perfect for my carpet-less wagon.

[dracowizard]

Wow....here i am trying to do my 65 clone and i can only praise those of you who choose to contribute parts instead of throwing them away...i know the more i focus on parts for my project i can only hope to have such luck!!!!! Mmmm.....any interior parts out there??

[theYman]

Ponjohn,
How different is a hardtop xmember from a convertible? I have a ragtop and I could use a better one than I have as mine's been welded... If it will fit I could probably pick it up depending where you are in CT...

Dave
The difference is on a convertible frame the crossmember attaches to the frame higher up because of it being boxed.<see link> The un boxed frame has the crossmember mounted to the lower rail. If a standard crossmember is used in a convertible it will raise the transmission up about 2 inches causing it to hit the floor.
http://us.a1.yahoofs.com/users/425c6d5ez545333d5/b695/__sr_/454f.jpg?phY1tEEBtC5D1vC0

[my69gto]

Yman,

Thanks for the clarification....
Dave

[nightwrencher]

hope this isn't too far off the idea here, but I got a '69 sbc 4-bolt 350 long block (needs bore/rebuild) if someone has a good set of alum vortec heads to trade. don't have to be aftermarket, just aluminum and take the higher lift. easier than trying to sell, in ocala fl, rare corvette/Z28 castin, block vin alleged impala, 300-370hp stock rating

[jamaca85]

i have a short shaft turbo 400 from a 1970 firebird. used and probably needs a rebuild. free just pay shipping, forward air preferred. thanks its here in vegas for free pickup. email me at jamaca85@hotmail.com

[SGTGTO]

Anyone have any 68 GTO goodies laying around? Perhaps some hideaway stuff :) hehe.

[gobrdgo]

Wow a free Muncie! I wish I was close!!!!

[Batman]

SGTGTO-

I have a 1968 hideaway setup and am interested in the Muncie......



I have a pair of old ET X 14 x 6.75 Centerline type aluminum rims (uni-lug) which are polished if anyone wants them. Tired of tripping over them in the Garage...........

[Batman]

68/69 GTO hardtop stainless window trim front and back (I think)I have a convertible so pay the shipping and it's yours.

[nap5]

SGTGTO

Give me an address and a date and I'll be there to get it!

PM sent

[SGTGTO]

Muncie may be gone, I have the PMs, so if that falls through, I will be in touch.

Why the interest in the Muncie, others have offered up auto trannies for free... and I missing something here?? I don't get it.

[Ron Landis]

Muncie may be gone, I have the PMs, so if that falls through, I will be in touch.

Why the interest in the Muncie, others have offered up auto trannies for free... and I missing something here?? I don't get it.
...about learning things the hard way! I'd have swapped a decent set of black '68 buckets for it! Still would.

[SGTGTO]

Jegstek - I woulda been kicking myself in the @ss if the black buckets in my GTO weren't in pretty good shape.

[Dave _68_gto]

Batman, I'll take the window stainless. Shipping to 34690. Thanks Dave

I have a 1968 Firebird radiator. It came out of a running car. I never ran it. I put in an aluminum radiator.

[Batman]

Dave 68 they are all yours.

I will even throw in the "aftermarket" silicone sealant residue somebody used for a windshield leak!

[Batman]

1969 GTO dark blue rear interior panels (look like mini door panels). Nice condition but once again, I have a convertible so not needed.

Pay shipping or pickup in Sacramento, CA

[Batman]

Pair of OEM Formula 400 fender scripts, off a '72 I think- pulled 20 years ago from a nice CA car and will clean up nicely. All studs present and accounted for- overspray included at no additional cost.

Pay shipping and 1 catch- you MUST post a picture of the car they are going on!:p

[firebirdcrazy1959]

i'll take them Please.I have a car that they would nice on.PM me your address please

[firebirdcrazy1959]

:attention OK here we go.Qtr glass 69 GTO hard top,both sides.Good shape,non tinted,from a non a/c car if that matters.Rear glass 69 GTO, 69 endura nose headlite bezels pitted,one 69 grill has damage,66 seat backs, metal, some surface rust,2 69 speedo clusters.I'll list more when i can remember what i have.Just pay shipping.:Peace:

[firebirdcrazy1959]

;) Pics of car emblems will go on.Its getting a 70 formula nose like my 80 firebird

[Batman]

They're yours firebirdcrazy!

I sent you an email, looks like a a cool project :cool:

[firebirdcrazy1959]

It is,the interior is very nice[deluxe].With the Formula hood and nose it will look real nice.

[grdn24]

id like the 69 headlight bezels if still avail and could be reconditioned,anything is better than not having any,which is the case now

[firebirdcrazy1959]

Still have them,i'll post pics.

[grdn24]

Ill take the bezels (for sure) and maybe the rear windshield glass depending on shipping on that one.Now i have to go out to look through my garage full of stuff

[firebirdcrazy1959]

:p Want a 69 grill,missing a fin

[firebirdcrazy1959]

missing a fin or two

[SGTGTO]

Firebirdcrazy- Thats a 68 grill. 69's have the horizontal bar through the middle.

[firebirdcrazy1959]

It was in the 69 i bought last yr.

[SGTGTO]

Not to be an ass or anything. But that IS a 68 GTO grill. The 69s had smaller openings and a horizontal bar through the middle.

[firebirdcrazy1959]

It was in the back seat so who knows.I beleive you about the 68.I'm an F-body boy.

[BILL BOWMAN1]

I have a old refridgerator I want to throw out. I works great just don't have the room. Not the prettiest thing, but great for a shop. Come and get it in Newark Delaware.
Thanks,
Bill

[Pontiacmuscle]

Im gonna offer up a Holley 650 4bbl that doesent turn or anything.....engine sat uncovered; maybe someone wants to do something with it?

[gman26]

:p Want a 69 grill,missing a fin

If you're giving that grill away I could use it, trying to piece together a 69 GTO front end on my Lemans.

[gman26]

I got a waterpump for a 69 Lemans 350, the longer one. Bought it by mistake, I needed the early 69 waterpump.

[firebirdcrazy1959]

Give me your address,please

[firebirdcrazy1959]

:drive: Got the Formula 400 emblems yesterday,very nice.Thanks Batman,Larry:drive:

[Pontiacmuscle]

10 bolt Rear Diff Cover is still available.

[66_GTO]

Pontiacmuscle,

I mailed the money order for the 10 bolt chrome rear diff cover today. Let me know when you receive it.

Thanks,
Doug

[Pontiacmuscle]

Cover is spoken for by '66. Thanks for the update Doug,
~PM~

[gobrdgo]

NOS plate is still available.

[Colin]

NOS plate is still available.
I will take it.....since the other guy doesnt want it. I cant use my Paypal account right at the moment though.....will probably be 2-3 days.
I have your email/paypal so I will send it as soon as I can.
To make a long story short, my card was cancelled because of fraudulent activity, along with like 60,000 other cards. Anyway, new card is on the way.
Thanks, Colin

[6t7goat]

I've got a Rear deck spoiler for a 04 Grand prix in black still in the box. Also a set of small block chevy valve covers that I powder coated with a chrome like finish. They aint perfect, few dings etc. Good enough for a chebby though. Also have a set of tail lights for a 99 or newer yukon or suburban. Pay the shipping and they are yours.

[Batman]

:beerchug: Larry-

Got the payment. I knew you would like the scripts they just need cleaning and I bet they will look like NOS. Well, maybe not NOS but you know what I mean...

Looking for more free stuff to give away. Stay tuned, same Bat-time, same
Bat-channel

[Pontiacmuscle]

Doug,
Cover was shipped 2day.....glad u can use it.
~PM~

[firebirdcrazy1959]

gman26 PM me your address,i have a set of 69 tail lite housings and a set of sunvisiors also

[pontiac locator]

this is a very cool idea....I will see whats in the garage I am tired of tripping over!

[Barrier Blue]

1976 four bbl. intake and a.c. compressor.
Free, you pay shipping or pick-up in Lorain, Ohio 44055.

[firebirdcrazy1959]

Any one want a 73 Catalina shell.2dr car,no chrome,eng,trans,rear,seats gone,its going to be stripped in the next 2 weeks.It has a PA title,not signed or notarized:( You will need a trailer or flat bed to take it.

[dlw6767]

stands under the tree...lol

[firebirdcrazy1959]

:confused: ?????:confused: or do i need another beer???

[mccalla7]

I can get into the spirit of this. I have a AC compressor that came out of a 69 Lemans with a 71 455 in it. I can take pictures if anyone is interested. I believe is has the condensor as well. It will be heavy to ship or p/u in FOrt Worth/ Weatherford TX.

Wish List:

I need to convert my Lemans tail lights to GTO if anyone has what I need. My housings and lens are good, if I can just attach the bezels. Not sure. I am also looking for a 69 GTO rear spoiler (black prefer). :)

Aaron
Weatherford Tx.

[Barrier Blue]

Aaron
I get to give away my a.c. compressor first!

[Bob Rutledge]

Not that I want it for free, but I am in the need of a 700r4 transmission for a 1988 trans am, If anybody has a decent one laying around. I can drive a few hundred miles to pick up, it just needs to be in good working order, as I cannot afford a rebuilt.

[skrinar70]

Parts from a 76 TA, this is all I have left...........

Glove box door for an AC with power trunk release.. decent shape for a driver, a couple nicks and scratches

2 good door jamb vents

1 good passanger side AC vent

1 good drivers side AC vent

1 good drivers side door handle cup

1 hood popper spring

1 pair of mirrors, remote driver, and manual passanger, they are in pretty good shape but need paint

1 pair of rear corner/parking lights in decent shape

1 tail light wiring harness, with backup, tag and corner lights uncut

all this is free plus shipping from 30121

Please pm me here, I get here every couple days and will get back to you asap

Thanks
Jim

[racerboy]

Anybody need a Turbo 350? Worked fine in my '65 GTO. Replaced it with an M-20. You can have the converter too.

I'd like to find an original neutral safety switch jumper, if anybody has one.

[pontiac locator]

Id like to contribute to this forum, 301 engine from a GP w/60k miles(actually have 2 more, 1 in an 80 bird runs but it misses, 1 from a mid 70s former demo derby car was running), saved it for my Girlfriends son, but he just bought a 350 Pontiac for his 80 bird......hes a college student, he needs a useable shaker scoop and aircleaner, frt spoiler, and side flairs, and snowflakes....anyone out there that can help him out?????717-749-3502 engines located in Waynesboro PA 17268

[Doug Christie]

Need brackets and pullies for 301 turbo if anyone has them. Will pay if I have to.

[pontiac locator]

Doug I have a whole box of left over Turbo parts....will see if theres any brackets, pulleys.....will non turbo ones do???? I have a few of them.....

racerboy where in NJ is the trans,,,, the struggling college student could use one! any chance you are goin to Carlilse in a few weeks????

[Doug Christie]

pontiac locator , I don't think turbo is any different than non-turbo. Need the alternator/power steering bracket, plus that 1" thick X 3" long spacer for the alternator as well as the water pump pulley. Thanks. Shipping would be to Chilliwack, B.C. Canada, V0X1X0.

[Doug Christie]

I have a hood for a '73 Grandville as well as air conditioning pump and other components for a '73 Grand Prix.

[pontiac locator]

Doug: alternator/power steering bracket<I have
plus that 1" thick X 3" long spacer for the alternator< I think I have
the water pump pulley<I have
Shipping would be to Chilliwack, B.C. Canada, V0X1X0< will get you a qoute once its boxed.

[iowapub]

Pontiac Locator, Id be intrested in the 301. I'm not too far.
I have no parts you need though.

I will offer up a new class III? trailer hitch for a full size Chevy P/U

This is for the roll pan type bumper, so the ball mount will go through a flip down license plate.

Either pay shipping or see me at Carlise Sat or Sun.

[Doug Christie]

Thanks pontiac locator.

[firebirdcrazy1959]

I have a 79 301 runs good.FREE,still in my car can here it run.I'll be listing more stuff later today.

[amcmike]

Have a 1st gen Firebird Hood. Not rusty, but quite dented.

Looking for a 10 bolt 8.5" to fit same.

[DScruggs]

This is pretty cool!

Im gonna offer up a Holley 650 4bbl that doesent turn or anything.....engine sat uncovered; maybe someone wants to do something with it?

I might be interested in the Holley. Figure shipping to 20782

Here is what I have for the free bin.

Available now.
Drum to Drum 1974 F-Body 10 bolt with 2.73 open
Quadrajet and intake that WAS on the 350 when I got it. Don't know the origin.


I want a manual steering box for the 74 F-Bird. Once I have it I will have two P/S pumps and two P/S boxes available. Condition unknown.

[amcmike]

Sorry, fits a 67-69. I'm in Southeast Michigan.

[69Droptop]

DScruggs,
I'm interested in the Quadrajet. What condition is it in?
Shipping would be to zip 54201.
Thanks.

[DScruggs]

Not the best. It WAS on the car and running but will need to be reworked.

[Drew W]

If anyone has the parts to install a cam, I'm looking for thrust plate, fuel pump eccentric, retaining washer and cam bolt. :)

Thanks,
Drew W

[firebirdcrazy1959]

This is pretty cool!



I might be interested in the Holley. Figure shipping to 20782

Here is what I have for the free bin.

Available now.
Drum to Drum 1974 F-Body 10 bolt with 2.73 open
Quadrajet and intake that WAS on the 350 when I got it. Don't know the origin.


I want a manual steering box for the 74 F-Bird. Once I have it I will have two P/S pumps and two P/S boxes available. Condition unknown.
Any idea on year of 350 intake and carb??

[DScruggs]

Yeah. 1975 (Buick for the carb) but they are already gone. A PY'er got the carb and a guy at work took the intake.

I also have 5 rally rims with crap tires. Free to pick up.

[69Droptop]

Ok, I don't have much that I'm sure I won't need yet, but I'll try this.

I have a set of 69 grills. The eggcrate sections are in good shape, but have some broken tabs and cracks in the front edge that goes under the bumper. One has a piece of the front edge broken and bent over. Both are repairable and would be good driver quility with little work (need paint.)

Lee

[GTOINDY]

If anyone has the parts to install a cam, I'm looking for thrust plate, fuel pump eccentric, retaining washer and cam bolt. :)

Thanks,
Drew W


Do you still need these parts I believe I have the thrust plate,fuel pump eccentric.

Vince

[Ron Landis]

Ok, I don't have much that I'm sure I won't need yet, but I'll try this.

I have a set of 69 grills. The eggcrate sections are in good shape, but have some broken tabs and cracks in the front edge that goes under the bumper. One has a piece of the front edge broken and bent over. Both are repairable and would be good driver quility with little work (need paint.)

Lee
I need a trim piece from between the headlights on a set of '68 Lemans grills, thinking the '69s ar the same. Not for me...letting them go with a car. Thanx. Ron

[Ron Landis]

U pik up! A complete '68-'72 A-body front frame clip from front body mount to tip of frame horns. Pretty good overall condition, with no rust or collision damage. I saved this because of condition and frequency of bad ones showing up on otherwise decent cars. If nobody can use it, I'll pitch it. No shipping. Last chance. Thanx. Ron

[Lemans1]

DScruggs, I work in Hyattsville and would like to pick up those rallys if they are 4.75 bolt pattern. I will shoot you an email. Thanks alot...

[Lemans1]

DScruggs, you are not setup to accept emails, so I sent you a pm.

[Pontiacmuscle]

The Carb has been spoken for and Big D is the new owner. Ships in the next few days.

[66geeto]

Don't need these:
R/L 66 gto drum brake and spindle along with the master cylinder. pm me if you want a shipping quote.
Want:
389 valve covers (66gto or similar)

[winbub]

Free to a good home...Pontiac 350 2bbl air cleaner. All you need to do is media blast and re-paint, no dents.

[69Droptop]

I need a trim piece from between the headlights on a set of '68 Lemans grills, thinking the '69s ar the same. Not for me...letting them go with a car. Thanx. Ron

Sorry Jegstek, can't help you with that piece. (The grills I have came with a batch of window parts I bought.)

[Ron Landis]

If anyone has the parts to install a cam, I'm looking for thrust plate, fuel pump eccentric, retaining washer and cam bolt. :)

Thanks,
Drew W
Send me you address and $5 shipping...they are yours. Ron BTW...Thanx, anyway, DT.

[firebirdcrazy1959]

Any idea on year of 350 intake and carb??
thanks anyway.i have 69 tempest wagon,68 bonnie,73 cat,some 69 gto stuff for free.list you needs and i'll see if i have them.the 69 gto head lite bezels are spoken for.I forgot who but PM me you address and i'll send them,just pay postage

[firebirdcrazy1959]

I'll be listing parts i really need to get rid of.I need space in my basement.Most stuff will be 70-81 f-body,69 gto,tempest,lemans,73 Catalina,68 Bonnie. It won't be free but cheap.Thanks to all my Pontiac Brothers:ranger:

[Safariman]

I have a 79 301 runs good.FREE,still in my car can here it run.I'll be listing more stuff later today.

I'm interested in the 301, if you are reasonably close by. I'm in the Tacoma, Washington area. I'll even help pull it.


I have several Pontiac style Quadrajets (front inlet) free for shipping costs. Will post stamping #'s later today.

Safariman

[Teej]

Safariman, I might be interested in one of those carbs...I'll drop you a PM. If it works out, I should have a Holley to offer up here.

And I'm still trying to find someone that needs a bench seat out of a 67 Tempest wagon. It's been re-worked in one area, but there aren't any rips or tears in it.

[Safariman]

What's the Holley, maybe a 1 for 1 swap?

[smuryof]

Dumb question, but will a '76 intake fit on a '70 400?

[smuryof]

I'd like one of those quads, whatever condition... I assume they all need rebuilding? I'm looking to change my 400 from 2bbl to 4bbl

I don't have a huge Pontiac collection (yet) but I have a couple things that maybe somebody might want:

'70 fullsize (Catalina) front left headlight assembly, complete
'67 Cast iron intake for Ford '289
'81 Honda CX500 engine, needs stator. (+ other misc. parts for same motorcycle)

Located in Ogden, Utah. Will ship the headlight assy. or intake, not the engine.

[Teej]

I'll see if I can dig out that Holley this weekend and see what it is. I'm pretty sure I know which box I stuffed it into...

[firebirdcrazy1959]

3000 miles away

[Safariman]

[QUOTE=smuryof]I'd like one of those quads, whatever condition... I assume they all need rebuilding? I'm looking to change my 400 from 2bbl to 4bbl

'81 Honda CX500 engine, needs stator. (+ other misc. parts for same motorcycle)



I'll post carb #'s as soon as I can get in the shed to check them (working 12's on night shift this week). Most will need rebuild kit, some are just shells, but I think 2 of them where complete still
If you were closer I'd take that CX500 engine and any other parts you still had, as I am still riding my '81 CX500 Custom almost everyday. Do you have the coil pack still? I've got a spare engine, but no coils, and thinking about building a go-kart out of it.

[Safariman]

3000 miles away


I figured that out right after I posted, but thought it would be bad taste to withdraw the post. Would have been a good engine to put in my Safari.

[Safariman]

Dumb question, but will a '76 intake fit on a '70 400?

Yes, but will have EGR and possibly other vacumn ports that you don't need. Might look at one of the used Performer RPM's below, if you don't have to stay "stock".

[smuryof]

Is someone on here offering up a Performer intake? I must have missed that. Or were you referring to something else?

[Batman]

[quote=smuryof] I've got a spare engine, but no coils, and thinking about building a go-kart out of it.

LOL I put a Kawasaki KD 100 2 stroke motor into a Briggs and Stratton go-cart frame when I was in high school. You will probably kill yourself in it but it sure will be fun.

PS DO NOT watch Dukes of Hazard before operating......... :eek:

[DScruggs]

The Carb has been spoken for and Big D is the new owner. Ships in the next few days.


Has this been shipped yet?

[Vince GTO]

If anyone has the parts to install a cam, I'm looking for thrust plate, fuel pump eccentric, retaining washer and cam bolt. :)

Thanks,
Drew W
Parts are in the mail you will still need the bolt and washer.
Vince

[DScruggs]

I have a stock TH350 torque converter. Very low stall speed. 1400-1500 RPM or so. Nothing wrong with it. I just went to a 2500 stall converter.

[Safariman]

Is someone on here offering up a Performer intake? I must have missed that. Or were you referring to something else?

There were acouple listed in teh regular classifieds, but would be worht the cost, IMO

[Safariman]

And for all those interested in the Quadrajet carbs I have, I'm now back on an 8 hour shift, will try to get in the shed tomorrow and get carb #'s and pic's

Sorry for the wait

Gary B> Safariman

[Vince GTO]

hello,
I am looking for a torque converter cover for a TH400 if anybody has an extra.

Vince

[rzrektd]

I would like either junk head that are able to be flow tested or a set of good heads that can be flow tested. I'll pay forward something. I want to learn how to port heads.

Thanks!

[Ron Landis]

Parts are in the mail you will still need the bolt and washer.
Vince
I sent parts, as well, also sans bolt and washer. Should be coming Priority Mail. If you won't be needing them, just send them back. Thanx. Ron

[Ron Landis]

hello,
I am looking for a torque converter cover for a TH400 if anybody has an extra.

Vince
but I've got 'em. Ron

[Ron Landis]

hello,
I am looking for a torque converter cover for a TH400 if anybody has an extra.

Vince
but I've got 'em. Ron

[baron_]

I would like either junk head that are able to be flow tested or a set of good heads that can be flow tested. I'll pay forward something. I want to learn how to port heads.

Thanks!


i would bet i've got a set you could have

i'll look around

[smuryof]

I need this cover also, for my '70 fullsize, if anyone has a spare.

In addition to the CX500 parts, the Ford intake, and the lefthand '70 headlight assy, I also have some '91 Mazda B2600i parts that I could part with, if anyone has this model truck. Stuff like the front grille, an extra AC compressor, ignition coil, valve cover, windows, seats, and many more pieces.

[smuryof]

I was referring to the TH400 torque converter cover, for some reason the quote didn't seem to work in my reply.

[Ron Landis]

not sure how this is supposed to work, but I'll send covers to those needing them for $10 shipping, as I cannot afford to cover shipping on other folks parts. I'll give you the part....best I can do. Thanx. Ron

[Safariman]

I was referring to the TH400 torque converter cover, for some reason the quote didn't seem to work in my reply.

I've got a TH400 torque converter cover, nice shape.

And for those waiting for Quadrajet pic's and numbers, I finally got in the back corner of the shed (yes, it's that bad), and found out I had a leak in the roof, lost most of the carbs to corrosion, along with several hundred $$'s worth of electronics and my most of my Ford FE gasket sets. Damm it....

GaryB> Safariman

[Safariman]

not sure how this is supposed to work, but I'll send covers to those needing them for $10 shipping, as I cannot afford to cover shipping on other folks parts. I'll give you the part....best I can do. Thanx. Ron


That's exactly how this is supposed to work!!!! Cool isn't it???

[GTOINDY]

but I've got 'em. Ron

Okay Ron were should I send the money
Vince

[P@blo]

Safariman,
I am looking for a good Qjet core and would be interested in a spare you might have kicking around. Let me know bragstob@hotmail.com

Also If anyone has door hinges for a 80 Firebird that they are willing to part with that would help allot. :)

Thanks
Brent

[GTOINDY]

I've got a TH400 torque converter cover, nice shape.

And for those waiting for Quadrajet pic's and numbers, I finally got in the back corner of the shed (yes, it's that bad), and found out I had a leak in the roof, lost most of the carbs to corrosion, along with several hundred $$'s worth of electronics and my most of my Ford FE gasket sets. Damm it....

GaryB> Safariman

Hey GaryB no response from Ron if you still have the torque converter cover I would be interested in it. shipping would be 45383. Let me know thanks. Does anybody need an HEI dist it is gutted except for the pick up coil.

Vince

[amcmike]

Does anybody need an HEI dist it is jutted except for the pick up coil.

Vince
I might if I knew what jutted means. Is that like gutted? Only definition I can find is "bludged" which doesn't make sense to me.

Still have a badly dented (raised portion close to the nose) '68 Firebird standard hood.

[Safariman]

Hey GaryB no response from Ron if you still have the torque converter cover I would be interested in it. shipping would be 45383. Let me know thanks. Does anybody need an HEI dist it is jutted except for the pick up coil.

Vince

Let me double ck to make sure it's TH400, if so it's yours

[GTOINDY]

Thanks for checking Safariman let me know.



amcmike
Yes, it is exactly like gutted very nice response.

[amcmike]

Thanks for checking Safariman let me know.



amcmike
Yes, it is exactly like gutted very nice response.

PM with shipping cost to 48170 please.

[smuryof]

There were acouple listed in teh regular classifieds, but would be worht the cost, IMO

Well, I just bid and won an Edelbrock #2156 for $102 after shipping (the going rate seems to be 100-120) and as soon as I had done that, I saw one someone was selling, already bead blasted, for $60. D'OH!

[goatee]

I have a new (repro) headlight switch, and some stock valve covers, as well as some new pushrods I'm not using, if anyone wants. For a 67 lemans...

[Velox65]

I'm looking for a torque converter that will stall around 2200-2400 RPM on a 455 with a turbo 350.
Also I am looking for rear Sway bar that will fit my 65' GTO, Rear Taillight's for my 65 and a neutral safety switch for a Turbo 350 console shift.

[firebirdcrazy1959]

gman26 ever get those parts??
grdn24 PM me your address again and i'll send the head lite bezels.

[gman26]

gman26 ever get those parts??
grdn24 PM me your address again and i'll send the head lite bezels.
I just sent you a PM! Sorry, I forgot!

[firebirdcrazy1959]

Just wanted to make sure they made it.Yes you can use the [my] address.

[GTOINDY]

Let me double ck to make sure it's TH400, if so it's yours


Any luck Safariman??

[Safariman]

Sorry, been working 12-14's again (gotta love the military). I'll try to get out there this week. I'm not even sure if anything is still there (the wife's been home alone, and was saying something about a "garage" sale .. jking

Safariman

[killer_69gto]

I have a dark green set of front door panels off of a 69 GTO that are in no way a show quality, but would be ok for a daily driver. Previous owner put screws in instead of clips around outside of panel and needs new carpet on the bottom. If interested let me know I'll only charge shipping. I can take some pictures also.

[firebirdcrazy1959]

gman26 i never got the money for shipping those free parts.Check get lost in the mail???

[firebirdcrazy1959]

:Peace: Thank you

[awsum67]

Goatee, if you still have the new repro headlight switch for a 67 Lemans, please send me a PM with your mailing address and what you need for shipping.

I have a used set of valve covers in nice condition off of a '66 389. These are painted covers, not chrome. They need paint. Thanks,

[firebirdcrazy1959]

gman26 thanks.

[lethal-428-lemans]

FREE 72 Lux LeMans, You want it it's yours.

http://forums.maxperformanceinc.com/forums/showthread.php?p=2578863#post2578863

[Batman]

1969 GTO dark blue rear interior panels (look like mini door panels). Nice condition but once again, I have a convertible so not needed. These can be died black.

Pay shipping or pickup in Sacramento, CA

[Thomasmoto]

It just so happens I could use that nitrous plate,especially if it uses jets in it. I happen to have a old intercooler front scoop for a 86=87 Turbo Buick, would that be OK?
Thanks, David T.

[ChupaCabras]

for trade: my first muscle car..sorry ..not a pontiac
1984 ford mustang gt convertible. been siting for many years, complete w/ '92 posi rear-end. '92 black leather power seats and other '92 black interior parts; passenger and rear in great shape, drivers shows some wear but still in great shape, great for parts or restore. other options: pw/pb/ps/pdlks/ac, 5 speed manual with factory 4bbl Holley, full fiberglass body kit: side skirts, front/rear balance, rear spoiler and hood scoop (from a '79). eagle 5 star alloys, rust free. trade for some hi-po parts for my '66 GTO. the seats and rear end should be worth the price of admission. looking for a 6al module, holley/demon spreadbore (in drop in and drive shape, street/strip), or ???
if you dont want the whole car you can come in and just take want you want from it.

[rzrektd]

If I am set up at norwalk, see me for free parts. I'll have gray trailer with primarily 66 GTO parts.

[joegio]

p/u or pay shipping via PM.

[Zombi]

I've got a pair of 6H heads, free if someone wants to come pick them up. I don't want to ship them. Located in Lakewood, CO.

[JOSE6969]

I THINK YOU ALREADY PROMISED THIS TO SOMEONE! BUT I'LL GIVE YOU A SET OF A MODEL A WHEELS.

[Gloryhound]

Wow this post is getting long. Hard to figure out what is still available and what isn't. Maybe a section that would allow individual threads or something should be started.

[form74]

GONE



USED valley pan as is. Will ship or pickup. Western
suburbs of Chicago.

[form74]

GONE


Drivers side Window Glass.

Free for Pickup Only. West Suburbs of Chicago.

[Safariman]

I'm looking for a torque converter that will stall around 2200-2400 RPM on a 455 with a turbo 350.
Also I am looking for rear Sway bar that will fit my 65' GTO, Rear Taillight's for my 65 and a neutral safety switch for a Turbo 350 console shift.


I had a TH350 converter from a 3.8 Buick that would probably give the stall your looking for, not sure if it went tot he heap yet or not. And for those still wanting the TH400 conveter cover, I should be back home (4 months in the desert) in a couple of weeks adn will try to dig the covers I have out also. More to follow.

GaryB> Safariman

[superfreak]

Looking for a TH 400 to rebuild? Have some back seats from a 64 tempest.
Craig

[N0DIH]

I am looking for a decent set of stock rear lower control arms for a 68-72 A Body. Anyone have some collecting dust? I have a sway bar I want to mount, so I will be sending them to a local welding shop to box.

Thanks!

[form74]

GONE

Two free mid 70's oil pans, must pick up in western burbs of Chicago. Used dirty condition. Cleaning out Garage

[tremo]

Got a set of '69 #45 heads in the Denver, CO. area. I've got them on craigslist currently for $60 (both), but they're Free to Pontiac folk on PY. Pick-up only.

http://denver.craigslist.org/pts/238350656.html

Drop me a PM or e-mail me at info@ramairperformance.com if interested.

Seee-ya, :cool:

Jim.

[form74]

Title says it all, thought somebody might want original Hardware. EGR's from 74/75's and Core Support hardware from 74 formula.

Pick it up or Shipping shouldn't be more than a couple of dollars.

Have at least one bracket and bolt for the EGR's

[LeMans70Sport]

I have 2 bucket seats from a 70 Lemans. Frames and tracks are in good shape The seat upholstrey is in driver condition and are brown. I also 8 stock used 350 piston standard bore. The pistons I can send but the rest is pick up only from West Michigan area-49088.

[Uncle Phil]

I'm looking for a right and left side seat support / seat frame for a 68 Firebird. The ones I have a pretty rusty, and had to cut them out. This is the brace/support that is right on top of the floor pan where the seat connects.

I have several extra items for a 68' I'll offer up if I can find these.

Also...........Needing a decent shape glove box door and a valance (which goes between front window and rear of hood). Mine is pretty pitted.

Let me know on any of these....I'll look over my items, and offer up a few of them.

Phil

[DScruggs]

70 400 Block (.030 over) with "N" crank - some rust
Pistons and rods for same
2nd Gen F Body 10 bolt 2.73 open complete assy
I set of 6X-8 heads

Assorted other F Body parts including shifter and cable, seat belt interlock, air cleaner housing etc.

All pickup only near DC

Need 4 cheap steel wheels and tires that hold air to remove racing tires for winter storage

[Thomasmoto]

Hi, Is the air cleaner housing for a TA shaker? I need just the bottom part of the air cleaner for my daughters 77 TA. We have the scoop, just not the part that holds the air filter.
Thanks, David

[DScruggs]

No. It is a plain 400-4V from about 74

[Lemans1]

Scruggs, do you think the 400 will need to be bored more than .040? I dont have any steelies around, only wheel I have with no purpose is a 60/70s style aluminum slot, but it has a tire and air and youre welcome to it. A buddy of mine might have something...you need all for? I will check it out.

Rich

[DScruggs]

.040 will PROBABLY be enough. I can't say for sure. I do need four wheels but you are welcome to the block regardless. If you want to come by and see lt let me know.

[DScruggs]

Block goes to metal recycler Friday

[kcompton]

In need of 15 inch (or larger) wheels. Upgraded to discs without a plan for the wheels, surely someone can help me out. Thanks in advance. not looking for handout, have a little $

[Lemans1]

Dscruggs, you have a pm.

[speedshopmike]

hi rich
hi scruggs
happy new year
-mike

[DScruggs]

Complete Big Car BOP TH400 - Was running fine when pulled.
2nd Gen F Body 10 bolt 2.73 open complete assy
I set of 6X-4 heads,

Assorted other F Body parts including shifter and cable, air cleaner housing etc.


Need a set of BBC rocker Studs, ARP connecting rod bolts, Decent Q-Jet core.

All pickup only near DC

[Thomasmoto]

Complete Big Car BOP TH400 - Was running fine when pulled.
2nd Gen F Body 10 bolt 2.73 open complete assy
I set of 6X-4 heads,

Assorted other F Body parts including shifter and cable, air cleaner housing etc.


Need a set of BBC rocker Studs, ARP connecting rod bolts, Decent Q-Jet core.

All pickup only near DC
Hi, Is the air cleaner housing for a Trans AM? I just need the lower part.
Thanks, David T.

[mashedfinger67]

Brand: Anchor (Korea)
Part#: 2335 (R), 2336 (L)


I got em' at checkerautoparts for $7.79 each when I had a hair brained idea that I could move my new 462 back in my '67 by using these mounts. They are just sitting around collecting dust and I am sure someone could use them. New owner to pay shipping. PM me if interested.

This is what Checker's web page say's the mounts will fit;

1970 - 1971 GTO
1973 GTO
1970 LEMANS
1972 - 1974 LEMANS
1969 - 1979 FIREBIRD
1970 - 1973 GRAND PRIX
1973 - 1975 GRAND AM
1971 - 1972 BONNEVILLE, GRANDVILLE
1971 - 1978 CATALINA, GRAND SAFARI

[DScruggs]

I'll take 'em

[DScruggs]

I'll take 'em

[FSJplumcrazy]

Anyone want a set of 326 emblems? They are in decent shape (good drivers anyway) with no broken posts.
They both look about as good as this one on EPay http://i6.ebayimg.com/02/i/000/8a/37/4078_1.JPG

I'm in need of the fuel pump eccentric pieces. I still have my bolt and washer, just need the part that the fuel pump rides on.

Wayne S

[amcmike]

Folks there's a guy over at pro-touring.com with a Camaro frontend (ACK!) on his '68 Firebird he is trying to correct. If there is anyone with any parts, I am sure he would be greatful. Can we help him out?

http://www.pro-touring.com/forum/showthread.php?t=27403

[BB1968]

not sure how this is supposed to work, but I'll send covers to those needing them for $10 shipping, as I cannot afford to cover shipping on other folks parts. I'll give you the part....best I can do. Thanx. Ron
Jegstek do you still have the covers? If so send me your address or some way to pay. You can either PM or send me email bbrw13@roadrunner.com

I have a hood for a 68 GTO very little rust, 2 vacuum operated headlight swithches, complete front supension (upper and lower control arms, spindles, druns, backing plates, etc. I converted my 68 to disc, also an endura bumper for 68 gto has a fist size dent in the left lower bar.

Thanks
BB

[matrix]

I have a 73 350 from a firebird. I bought it just to steal some parts for a 400 that I am building. Was told it is a good running motor. It is very clean inside. I have taken the accessories, valley pan , oil pan, oil filter adapter, timing cover, and rocker arms. So basically you get the assembled block and heads that i believe to be a solid motor but make no guarantees. If someone is interested I can pull a few bearing caps and see how they look. Just pick it up.

[FSJplumcrazy]

Emblems gone:)

Wayne S

[FSJplumcrazy]

I have a 73 350 from a firebird. I bought it just to steal some parts for a 400 that I am building. Was told it is a good running motor. It is very clean inside. I have taken the accessories, valley pan , oil pan, oil filter adapter, timing cover, and rocker arms. So basically you get the assembled block and heads that i believe to be a solid motor but make no guarantees. If someone is interested I can pull a few bearing caps and see how they look. Just pick it up.

Was this a non-A/C motor and are you going to use the oil dipstick and tube?


Wayne S

[a95toy]

Well guys i'm looking for a good 455 core motor short block would be good and i'm parting out a 74 ventura. Good hood grills, doors are fairly good shape, Good glass all around including the chrome Dash and wiring harness in tact, Car has 72k original on a 250 six kicker 3speed standard trans. Sorry column was already gone. Also looking for 8.5 limited slip diff. I'll have a few other parts available including a running 71 400 once i get the 455.
later
T

[BB1968]

Anyone want a set of 326 emblems? They are in decent shape (good drivers anyway) with no broken posts.
They both look about as good as this one on EPay http://i6.ebayimg.com/02/i/000/8a/37/4078_1.JPG

I'm in need of the fuel pump eccentric pieces. I still have my bolt and washer, just need the part that the fuel pump rides on.

Wayne S

Wayne do you still need the eccentric pieces? I think I still have some, if so PM me. BB

[FSJplumcrazy]

Nope, I'm good on that one (thank you)...digging around now for a set of head bolts to mount the oil deflector under the valve covers, anyone have some laying around?

Wayne S

[*67firebird*]

hi,
im looking for some head bolts, anyone have any lying around, will pay if need be, just dont want to got the $80 dollar way yet.
Osvaldo

[sharkbite]

hi,
im looking for some head bolts, anyone have any lying around, will pay if need be, just dont want to got the $80 dollar way yet.
Osvaldo

I have a few sets of stock head bolts. Just cover shipping $5-$10 if you want them (not sure) Shot me a PM if you want a set

[heff]

i've got some 68 350 heads, can't remember the cast numbers, they need to be cleaned and rebuilt, but they're virgins...anyone want em come get em, they're taking up room.

[stu72]

sent pm

[Fast Floridian]

this is exactly what Jesus did. He paid the ultimate price when he gave his life, so we could live. Awesome. The thing is we need to PM him to get eternal life. The gift cant be given until we chose to receive it.


I got round port supercomp headers for 2 gen firebird 2inch primaries. for someone??????

[Lanny]

You have Mail (pm)

[gobrdgo]

Free pontiac 350 auto tranny in orange ca, Jared 714 614 1974

[Doug Christie]

Need a 301 4bbl intake if anyone has one. Thanks

[Lanny]

Fast Floridian
did you get the pm's I sent you about the headers ?
I would like them If you still have them.
Thank you
Lanny

[fried boloney]

Anybody near the upastate SC area have a good clean Rally II wheel? Doesnt matter what size or bolt pattern ,I just want one I can paint up for a display piece.Could also use a trim ring if you have it,not looking for show quality just a clean presentable piece

[Uncle Phil]

I'm needing a working blower switch (that fits on top of the controller) and also a control cable that connects the controller to the defrost duct on the heater box. (I have the other 2 cables). All of these for a 68 FB.

I will offer up a set of drum brake spindles for a 68 FB.

Thanks!!

Phil

[Tone]

I could trade the windshield trim and bench seat from a 73 Lemans if anyone needs it....


I'd be interested in an intake or carb possibly. I'm still working on getting dual exhaust...so if you have pipe laying around....lemme know.

[cruze69gto]

I have a YB code 350 bare block, standard bore. If anyone is interasted. I will be going to Norwalk can bring if someone needs it.

Mike

[fasteddy]

I need 2ea 63 Tempest hood bolts with retainer springs-any help would be greatly appreciated. I had all 4 but a buddy tossed the 2 that fell out in the steel scrap bin.

[64-389]

GOBRDGO, PM sent for 350 tranny....

I have a '64 Star cheif hood and trunk lid. A little rust on both, definitely restorable. Should fit Bonne or Cat..

Also have '64 big car hydromatic transmission (R on bottom)...works good.

[winbub]

AVAILABLE (but ya gotta come git it)

'66 Tempest Custom Front Bench Seat
'66 tempest Custom Doors (2)
'66/67 GTO inner fender wells (2) - need work

[limejudge69]

I have the vinyl top chrome side/corner trim and clips for 69 Grand Prix. All will need polishing, but no pits. One piece was bent slightly during removal, but should be fixable. PM if interested and I'll send it to ya!

[FirebirdTA]

I have a 79 T/A shell that someone can have. Body is mostly rust free. Only the floor has some surface rust and the trunk is rusted out. Tail panel, quarter panels (passenger quarter panel has a dent above the wheel well),T-top roof, cowl/firewall (does have about a 12" crack) and frame are completely rust free. Windshield is good but has a few chips and the back window is good. I do not want to take it to be scraped with good body panels. It is in Tulsa OK.

Eric

[bristew8]

I have 74 400 block set up for 4- bolt main pontiac 350 block various pullies, 77 400 intake couple of HEI dist. firebird hood ( base) Looking for heat and a/c boxes inside and out 77-79 bird and trans crossmember th350 for 77-79 bird

[fried boloney]

needs rebuilt,probably under 50,000 miles,was replaced under warranty because it got some antifreeze in one cyl and FUBARRED the piston. Pieces of piston scored the cyl wall.I have the complete engine minus the supercharger and exh. manifolds. Free,pickup in SC

[Blowd]

These look like they were left in a hail storm and repaired with a ball-peen hammer. OK seriously, exterior patches on both lower, old damage to leading edge and behind/on wheel well.
Got these as part of my most recent backyard find. They are beyond my skills/patience, but I know repros aren't that great and maybe someone thinks these aren't that bad.
Free to good home but will not ship. I just don't have time to mess with at this price. Might meet or deliver for consideration. I'm NW of Houston (Cypress) TX. Post here for first dibs, PM, or email gr8dealz@aol.com for info/details.

[lazlo]

For my project 71 GTO Vert... looking for a set of stock exhaust manifolds for my 72 455 motor with 1967 061 heads. It's got new headers on it now & I would rather have stock.. Got my 71 in a million pieces & I'm sure I'll have a ton of extras when I get it back together

[Schoust]

Guy's I am also looking for the same set of logs for a 72 455 if anyone has anything let me know after Lazlo that is.......

[techteacher5561]

BB1968,
sent you a email on the hood and bumper,

I'd have to offer a 68 350 block w 17 heads in the very near future due to my new motor being built.

possibly a Torquer intake (not a T2) trying to think or what I've accumulated.
an HEI working now not sure how good , bought a new/used one.

Howard

[1967firebirdsg]

Hello,i need a set of frame mounts for a 67-69 firebird.Also a Dominator...

[sharkbite]

Looking for drip rail molding and vinyl top trim for 72 GTO. I have a few pieces of each but need to complete the sets. Thanks

[elcaminobill]

Anybody near the upastate SC area have a good clean Rally II wheel? Doesnt matter what size or bolt pattern ,I just want one I can paint up for a display piece.Could also use a trim ring if you have it,not looking for show quality just a clean presentable piece


I'm in the Greenville area and probably help you. If I don't have one, I know a guy selling a set of 5. PM me.

Thanks,
Bill

[elcaminobill]

needs rebuilt,probably under 50,000 miles,was replaced under warranty because it got some antifreeze in one cyl and FUBARRED the piston. Pieces of piston scored the cyl wall.I have the complete engine minus the supercharger and exh. manifolds. Free,pickup in SC


I'd be interested in this if you still have it.

[hpp]

Have a Holley Streer Avenger 670CFM carb bought it 7/29/06
looking for a good rebuilt Quadrajet.

[Rack776]

*Fiero 2 Cam Quad 4 Swap *Drag Car Body
I'm not looking to make money I just dont want to waste a good engine!

I'm looking into purchaseing a new car soon and I would hate to see the one I have now go to the scrap yard.
If anyone wants to use it for a project let me know, the insurance runs out in May after that it goes to the yard.

Its a 1991 Grand Am SE with a super strong Quad 4 & Automatic Trans
Great Air Conditioning & Factory Finned 5 Spoke Aluminum Wheels. New Exhaust
and Power Steering Pump.
Oil was changed regularly It has 103,000 miles mostly highway & had new head gasket at 50,000.

I figure someone could use the twin cam engine in a fiero or build a tube chassis drag car out of the body.
If it did not run so strong I would just junk it with out a second thought.

It has a clear title but The Body is starting to rust out under the rear coil spring mounts and I dont think its safe enugh to be a passenger car anymore. the outside is ok, the interior is shot. Lights, Lenses & Bumpers are ok, driver door has a small dent at the top.

It can't sit around long to part it out so it gota go as a whole car if possible.
If you need something off it bad enugh and I'll consider taking it off for you.

I just want scrap value & title transfer money for it. (Or I can trade for 70-81 T/A parts
or Pontiac V8 engine parts I'll take any available)

It needs to be picked up around Allentown PA area.

Jason Rackawack
rack776@yahoo.com
I can respond to emails Monday - Friday

[hungry69bird]

wondered if someone might have headlight ring layin around for a 69 firebird...i imagine all the dual headlights would be the same...this is the part with the 3 clips that retain the headlight from falling on the ground...

[mechanic17]

Hey Compadres:

I can offer up a full set of new-in-the box Clevite 77 .030 under rod bearings PN #CB-758-P30.

Can anyone spare any of these?:
-a decent V8 timing cover (pref studs and/or w/good water pump in it)
-cam thrust plate w/bolts and fuel pump eccentric w/bolts
-non-chrome dipstick with tube and/or stock windage tray lower tube
-tall valve covers or some means of raising stock covers above roller rockers
-a throttle cable/bracket that will work on '70 GTO (no need for # correctness)
-a set of straight pushrods between 9.5" and 9.6" length

Keep up the good work!

[Rack776]

I have a YB code 350 bare block, standard bore. If anyone is interasted. I will be going to Norwalk can bring if someone needs it.

Mike

I am interested in the block, but I cannot go to Norwalk this year.
Where is the block at and is it rebuildable?
I'm in Allentown, PA or about 1.5 hours north of Philladelphia, PA
I would be willing to drive about 3 or so hours to get it.

Thanks, Jason:)

[Rack776]

I'll offer up a Bug Shield thats off my 1996 S-10 Truck
Its in OK shape a few small scratches will work great for a driver.
if anyone needs or wants it it's theirs for free just pay the shipping.

Jason:burnout:

[FrankieFeenixx]

original GM 13/16" front sway bar up for grabs. Must pick up in Lodi NJ, I'm not dealing with shipping this thing.

[gto_30_1967]

is the 66 fender the same as the 67 gto fender? im also looking for a 70-72 gto deck lid. Anyone have one?

[gto_30_1967]

Are these the mounts that bolt to the block? if so i need them for my 455 going in a 71 gto.




Brand: Anchor (Korea)
Part#: 2335 (R), 2336 (L)


I got em' at checkerautoparts for $7.79 each when I had a hair brained idea that I could move my new 462 back in my '67 by using these mounts. They are just sitting around collecting dust and I am sure someone could use them. New owner to pay shipping. PM me if interested.

This is what Checker's web page say's the mounts will fit;

1970 - 1971 GTO
1973 GTO
1970 LEMANS
1972 - 1974 LEMANS
1969 - 1979 FIREBIRD
1970 - 1973 GRAND PRIX
1973 - 1975 GRAND AM
1971 - 1972 BONNEVILLE, GRANDVILLE
1971 - 1978 CATALINA, GRAND SAFARI

[gto_30_1967]

is a 66 fender the same as 67, if so i'll take it off your hands!

jim




The 66 GTO Passenger Fender I have For Sale... IT's free if you pay for shipping or pick it up!

[form74]

Tired of holding onto this and thought somebody might want it, Free for the taking was mounted still last summer and holding air. Like brand new.


Original Goodyear Spare FR78-15 from 75 Formula. Pickup only

[vidguy]

Sorry about the Fender. It is gone.. They are ALMOST the same but a minor difference at the front near the grill.