KRE SERVICE

[chiefbigb]

About a year ago I had a falling out with KRE over the MR-1 block I bought.Being a hard head I stopped dealing with them because the deal was not handled to my liking nor in the timeframe that seemed acceptable to me.After dealing with some of the other vendors on the parts side I can say they were much better than most.I will continue to seek out another vendor that can match their service level but I may never find one.

[Dave Polichena]

I can understand the dilemma that the block issue created but I wouldn't let that get in the way. Everybody makes a mistake, we're only Human. Jeff has always been good to me and they almost always have what I need in stock and ready to ship. I made a call very late in the day for some pushrods and I needed them quick, they did not have the length I needed, Jeff said no problem I'll get them to you, I thought no way but the next day I had them direct from Comp.

[Polar-Pontiac]

I hope to purchase a block this summer from Kre..class act..

[PITTSBURGH 64]

Everybody deserves a second chance.

[Brian Baker]

http://www.knoxcountycpcourt.org/

1.) Left click on the "press here to start your search" icon in the center of the screen.
2.) Left click "General Index" to the left of screen to begin your search.
3.) Enter "Kauffman" as your party name and left click on "press to begin search".
4.) Left click on case number 070T010004.

If you've never seen an instance where a vendor attempted to sue a customer in court for defamation for simply speaking the truth...now you have.;)

[Rugratman]

KRE has alway's been a class act to me, and I have spent thousands of dollars with them. I'm sure they had to get their ducks in a row, to make the MR1 thing right, which they did, in my opinion, it just took more time then expected, all these internet forum lawyers aside.
But, if you need parts, Try calling Spotty....Also a class act, knows his stuff too. He just doesn't make his own parts.
He's just as tough to get on the phone though......LOL
Jeff is a good man, I don't care what everyone say's, they will alway's have my business.

[Brian Baker]

I'm sure they had to get their ducks in a row, to make the MR1 thing right, which they did, in my opinion, it just took more time then expected...
Mr. Roberts has still not been "made right" for his defective block...a block that fits the criteria of KRE's recall letter...a letter that Mr. Roberts never received.

[bigchief468]

I continue to be impressed with the engine KRE built for me in 2002. The motor dyno 743 HP. The motor is now 4 years old. Two years ago I replaced head gaskets with the Cometic brand. This next week I am replaceing valve springs. The car (with driver) weighs 3440 lbs. The car's best time is 9.74 @ 138MPH. I am in the process of building another KRE High Port motor. Thanks KRE for the high winding Pontiac motors and keep up the good work.

[BVR421]

KRE works for me, 2 sets of HiPorts and a KRE block.
NO PROBLEMS

[johnta1]

Brian, did Roberts lose?
Supposed to have a court date and there is no other appearances?

:confused:

[Brian Baker]

Brian, did Roberts lose?
Supposed to have a court date and there is no other appearances?

:confused:
Nope. Case has not been closed yet, or even fully heard. Just opening motions from the lawyers on both sides to date.

[that guy]

another case of soft creamy filled sponge cakes goes to the man with the most negative posts.and he still knows not of what he speaks.but the gift certificates pile keeps building.if you want to post factfull information tell everyone why hpp posted a national add 4 your car at vmp LAST YEAR and it wasnt there and from what ive seen it didnt make it this year either.you run your cake hole about everyone else get that peice of junk running and at the track or go back to your plate which is allways full and shut your suck

[tstevea]

KRE IMO has always treated me honest and fair.Jeff and co. are good guys!Others may have issuses with them : not me .happy with my e-head and their d-port heads.

[Brian Baker]

another case of soft creamy filled sponge cakes goes to the man with the most negative posts.and he still knows not of what he speaks.but the gift certificates pile keeps building.if you want to post factfull information tell everyone why hpp posted a national add 4 your car at vmp LAST YEAR and it wasnt there and from what ive seen it didnt make it this year either.you run your cake hole about everyone else get that peice of junk running and at the track or go back to your plate which is allways full and shut your suck
"The Smoking Man" speaks, while hiding behind a keyboard, from a public library in Columbus, OH. I guess they don't have dial-up access in Glenmont?:rolleyes:

You know, since you're at the library, perhaps you should check out a book on proper grammar using correct english and sentence structure? Your blathering is almost too painful on the eyes.

As for my nostalgia funny car having been advertised as an attraction at a previous "Pontiacs in the Park" event at VMP, I had nothing to do with that, nor did I receive any money for that, nor was I ever going to receive any money for the appearance. The advertising for that event is handled by Chief Pontiac Productions, not myself. If you are upset that the Crusader funny car did not make an appearance, I'd like to suggest that you take the matter up with Chief Pontiac Productions.

Since we're on the subject of publicly disseminating factual information, why don't you answer this question, Mr. KRE Mouthpiece:

Why is it that Mr. Roberts, who purchased a MR1 "straight 4-bolt main" block, did not receive a public recall letter on said block, while other customers that purchased the same style blocks did? The facts are irrefutable.

Please send the creamy filled sponge cakes to me at:

11010 Trade Road
Richmond, VA 23236

I'll be sure to pick them up on my next visit to redeem one of my many gift certificates.:rolleyes:

[Brian Baker]

I continue to be impressed with the engine KRE built for me in 2002. The motor dyno 743 HP. The motor is now 4 years old. Two years ago I replaced head gaskets with the Cometic brand. This next week I am replaceing valve springs. The car (with driver) weighs 3440 lbs. The car's best time is 9.74 @ 138MPH. I am in the process of building another KRE High Port motor. Thanks KRE for the high winding Pontiac motors and keep up the good work.
Put bearings in it yet?

[Matador-IV]

[QUOTE=Brian Baker
Why is it that Mr. Roberts, who purchased a MR1 "straight 4-bolt main" block, did not receive a public recall letter on said block, while other customers that purchased the same style blocks did? The facts are irrefutable.
:[/QUOTE]

"Self imposed" recalls are at the discretion of the manufacturer, and can be directed as they see appropriate. A "court mandated" recall is something totally different.

Hypothetically, a manufacturer could decide not to recall a specific product believing they will end up in court anyway, possibly resulting in a more favorable outcome.

Sometimes the squeeky wheel doesn't get the oil, it simply gets removed and replaced with a more desirable wheel.:Peace:

[Brian Baker]

"Self imposed" recalls are at the discretion of the manufacturer, and can be directed as they see appropriate. A "court mandated" recall is something totally different.
What if the self imposed recall letter is worded as "[insert vendor name here] is undertaking a voluntary recall of ALL [insert block name here] cylinder blocks it has sold with the original Pontiac style straight center main caps"? Would that not apply to every customer that purchased such a block?

[Matador-IV]

What if the self imposed recall letter is worded as "[insert vendor name here] is undertaking a voluntary recall of ALL [insert block name here] cylinder blocks it has sold with the original Pontiac style straight center main caps"? Would that not apply to every customer that purchased such a block?

Well....based on this all being "second hand" info and only assuming it to be accurate, in principle perhaps it should apply. But strategically, if the manufacturer strongly believes they'll end up in litigation, and views the complaintant as "hostile or slanderous" then their best approach from a legal standpoint is to let it go to court.

Again, a self imposed recall can be as narrow as the manufacturer chooses: the week,day or hour a product was made, color of skin,or number of nipples.

Only a court of law can determine whether the criteria used was fair and resonable.

[Brian Baker]

I would think that, "strategically" (as you put it), all bets are off if the manufacturer/vendor places in print, a statement such as that. When they say "all", it means just that...not a smaller select number. I think a judge would find it very capricious for Mr. Roberts to be denied satisfaction after seeing such a recall letter.

[Rugratman]

Anyone of you guy's have a law degree?
I'm sure they picked on him for no reason.

The Pontiac world is small, so to answer the original question, Your choices are limited. Good luck and what parts are you looking for?

[Brian Baker]

Anyone of you guy's have a law degree?
I'm sure they picked on him for no reason.
So...now I need a law degree to know what the word "all" means?:rolleyes:

I'll bet you believed Clinton when he said "that depends on what is, is".