69 Firebird with chevy 350

[jtkk0360]

I have a 69 Firebird that I am putting a chevy 350 motor in it built by a company called TandL engines , it is going to be a 408 stroker, When I bought the car it allready had a chevy motor in it, any body know of any problems with fitting applications such as headers I am going with hedman ceramic coated long style, and chrome deep oil pan and 700 r4 transmission, My car does not have ac or power steering just manual steering

[72Ventura]

Check and see, but the Chevy small block 400 looks nearly identical to a 350. Bored 0.040 over gets you 408.7 cubic inches and you can use any parts that fit a 67-69 Camaro basically as a direct swap.

[sleepy]

The 305, 350 and 400 blocks are the same. On the outside. Inside however they are different. 305-350 same crank different bore. the 350 is bigger. the 400 has a longer stroke bigger bore and more clearance in the bottom end to accommodate the crank. the flywheel on the 400 is also a balance plate.