View Full Version : Lower driver side patch panel
soupman
12-01-2008, 10:30 PM
Looking for a rust free lower section for a 74 t/a. The 75-81 cars will work also. It only has to be the outer piece, do not need the drop downs, and can be cut at the beltline.
Thanks
Trans-Formula II
12-07-2008, 05:47 PM
Are you looking for the fender or quater panel? I have both, and am in Rochester, NY.
soupman
12-08-2008, 11:54 AM
I just need the lower quarter panel piece, from the wheelwell lip to the rear bumper, about 10" up from the bottom.
Do you have a rustfree piece that is OEM? The repop pieces do not have the "flute" near the bottom.
Thanks
soupman
01-15-2009, 09:17 PM
Anybody have this section, used or cutoff is fine. A 75-81 panel will work for me.
Thanks
GRNMTGOAT
01-19-2009, 07:06 PM
Hi soupman, try Andy Whall,Whalls Auto Dismantlers, Milford [nr Cooperstown] It doesnt look to be too far from you and ,if you take a generator and sawsall you can probably DIY. He has 20+ birds to part out. Bruce.