View Full Version : tiger heads, different pistons?
BrandX
06-17-2010, 08:40 AM
was wondering if i ever wanted to switch over, would i have to change pistons? I have heard the valve angle is a little tighter.
'69ragr
06-17-2010, 10:35 AM
When I purchased my short block from AP, Frank mentioned that the pistons were cutrelief to allow me to go to Tiger Heads in the future. Cannot tell you how muck and were but they are definitely different. I currently have 72cc SD 330 heads.
Deno
Robert C.
06-17-2010, 01:30 PM
They are 12 deg. Valve reliefs in our Pistons. If you put them in when you build your motor any head will that is on the market today will work. Then is is just a bolt on deal.
ponjohn
06-17-2010, 01:40 PM
UH OH.....365 high ports are not enough.
Robert C.
06-17-2010, 05:00 PM
Our Heads CNC ported can make as much with the right Intake and carburetor 1050 H.P. if you buy them complete from us.
LiL Jack
06-17-2010, 06:39 PM
was wondering if i ever wanted to switch over, would i have to change pistons? I have heard the valve angle is a little tighter.
With nitrous?
BrandX
06-17-2010, 06:59 PM
i was just looking around. But doesnt look like they are in my future right now, dont feel like changing pistons.
BrandX
06-17-2010, 07:00 PM
With nitrous?
are they not good for nitrous?
wreckmastr
06-28-2010, 08:16 PM
With nitrous?
LMAO! :pound: