Ported 6x-8 heads 2.11/1.77 valves

[dirty joe]

These were ported by following jim hands book. EGR is filled. Has 2.11/1.77 valves. Springs good to .550 lift hyd ft. I would freshen them up with a valve job and guides/seals. Dont really know what to ask. So lets start at $500

Located in mustang, ok.

Call or text if you want 405-408-6496

[Colin70TA]

PM Sent.

[walt03]

What is the average intake and exhaust cfm's
Chamber cc's

[dirty joe]

Pm returned Colin

Walt, i actually bought them used from a guy local to here with the intention of using them on a turbo 455 deal. It went 12.60s in a 62 tempest with a 068 cam on a .030 455. Guy i got them from ported them and i think he ported a couple other sets following jim hand's book. They have never been on a flow bench. I could see about getting them flowed though. A machine shop local has a flow bench. And i would have to measure the combustion chamber

[dirty joe]

Bump this up. Make offers. Dont want these just sitting around

[joes455]

Pics

[dirty joe]

I will get pics this afternoon

[dirty joe]

Got the heads flowed. They flow 236/175 at .600 lift. Ill have exact sheet tomorrow and they are gonna clean and surface the heads. Ill get pics when i get them back tomorrow

[dirty joe]

Thats on a stingy flow bench and at 28"

[ponchjoe]

DJ,

Did you have them CC'd too?

[dirty joe]

I will see if they can do that tomorrow too before I pick them up

[dirty joe]

PJ, they are 99 cc chambers

[dirty joe]

http://i93.photobucket.com/albums/l51/whocares84/Mobile%20Uploads/20150723_173602.jpg (http://s93.photobucket.com/user/whocares84/media/Mobile%20Uploads/20150723_173602.jpg.html)

http://i93.photobucket.com/albums/l51/whocares84/Mobile%20Uploads/20150723_173245.jpg (http://s93.photobucket.com/user/whocares84/media/Mobile%20Uploads/20150723_173245.jpg.html)

http://i93.photobucket.com/albums/l51/whocares84/Mobile%20Uploads/20150723_173239.jpg (http://s93.photobucket.com/user/whocares84/media/Mobile%20Uploads/20150723_173239.jpg.html)

http://i93.photobucket.com/albums/l51/whocares84/Mobile%20Uploads/20150723_173227.jpg (http://s93.photobucket.com/user/whocares84/media/Mobile%20Uploads/20150723_173227.jpg.html)

http://i93.photobucket.com/albums/l51/whocares84/Mobile%20Uploads/20150723_173217.jpg (http://s93.photobucket.com/user/whocares84/media/Mobile%20Uploads/20150723_173217.jpg.html)

http://i93.photobucket.com/albums/l51/whocares84/Mobile%20Uploads/20150723_173210.jpg (http://s93.photobucket.com/user/whocares84/media/Mobile%20Uploads/20150723_173210.jpg.html)

[dirty joe]

Comes with rocker studs and guide plates too

[dirty joe]

Bump it up

[ponchjoe]

I wish you weren't so far away....

[dirty joe]

SOLD, thanks PY