PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   Industry Stuff (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=473)
-   -   Parts you would like to see reproduced (https://forums.maxperformanceinc.com/forums/showthread.php?t=445749)

Formulabruce 09-24-2020 09:47 PM

X3, I would buy a set as well. I am sure a cast machined wheel will balance and run much better than the originals.

Formulabruce 09-24-2020 09:51 PM

Quote:

Originally Posted by Region Warrior (Post 6173133)
If not already brought up, a 67-72 style aluminum stock intake for q-jets.
Not factory part numbered or anything like that. Like an aftermarket replacement.
Even better if had enough material to port RAIV size...

Pontiac spec'd a Edlebrock P4B for some high performance engines in late 60's
May have been the Ram Air Super duty in '69.

Barrier Blue 09-25-2020 11:38 PM

1967-68 GTO deluxe steering wheel.

Barrier Blue 10-15-2020 06:57 PM

1967 Lemans/Tempest tail light bezels.

Brian Baker 11-01-2020 12:42 AM

I'd like to see more parts made available for the 73-77 A-body.

LemmyThe1972Wagon 11-01-2020 05:50 AM

More parts for 71-72 a bodies with steel bumper front ends and more parts for 4 doors at least.

Plus how about some love for the 71-72 grand prix? Front end panels, core support, rear license plate pocket, rear taillight lens and housings, the list goes on.

vertigto 11-01-2020 12:21 PM

Center AC vent deflector for 1970/71 GTO...

bankbook 11-01-2020 07:41 PM

Correct Tenth anniversary carpet.

nikrnic 11-01-2020 08:08 PM

66 Deluxe Steering Wheel.

Sent from my SM-G970U using Tapatalk

chief2k 12-22-2020 12:25 PM

66 LeMans Grab Bar
 
Any chance of making the lucite insert for a 66 LeMans grab bar?

blackadder 07-04-2021 01:16 PM

65 GTO
 
Metal quarter panel extensions for 1965 Lemans or GTO's. Seem good used ones are hard to find.

rwfisher 02-14-2022 07:55 PM

1969 Firebird Tach / Stacked Gauges.
 
Any rumors of anyone reproducing these in the future.?. I’m guessing there was limited interest when they were offered previously but with new interest in this 1 year model there must be some demand for a few more runs?

lugnutx2 02-14-2022 08:04 PM

Disc brake rotor without hub, for the 67 -68 2 piece rotors.

rick c 03-29-2022 06:51 PM

69 firebird stacked/stepped gauges
 
I too would like these reproduced.

389 03-29-2022 07:31 PM

Hurst Auto Stick I Shifter
 
The Hurst Auto Stick I..

They were one of the best automatic shifters ever. It bolts to the tranny and has direct linkage instead of a cable.

I had one on my 64 Pontiac TH400 and I just put one on the TH-400 in my 69 el Camino SS427.

It has such a nice feel.

389 03-29-2022 07:38 PM

My 64 Pontiac

TxSportCoupe 04-11-2022 09:46 PM

https://uploads.tapatalk-cdn.com/202...afaa414add.jpg1970 Lemans front side marker lenses and front valance panel would be nice. No one makes them. Side markers are impossible to find. Last OE valance I saw was $1000 and it was beaten. That was over a year ago. Lots of good Iron being cloned over for lack of available front end parts.


Sent from my iPhone using Tapatalk

dataway 05-19-2022 01:16 AM

Vinyl Top Trim Pieces .... the long one across the back, and on each quarter.

Yellow Banana 06-07-2022 08:53 PM

Lenses for 1964 Grand Prix park/ turn lamps
 
I find it interesting that lenses are available for ‘63, ‘65 GPS and most of the GTOs with similar lamps, BUT NOT the ‘64 Grand Prix!

65madgoat 06-07-2022 08:58 PM

How about figuring out how to get the stacked gauges for a 1969 Firebird (and in dash tach) reproduced again..... simply made and crude reproduction was out there for $600+


Lets get someone to make them again now.


All times are GMT -4. The time now is 10:29 PM.