PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   The Body Shop TECH (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=417)
-   -   Door Alignment (https://forums.maxperformanceinc.com/forums/showthread.php?t=858674)

Tarl 05-13-2022 04:28 PM

Door Alignment
 
4 Attachment(s)
Hi,

My 68 firebird was redone about 5 years ago by the PO. The drivers side door has a gap on the lower rear. Pictures from before final painting indicate the door does seem to fit correctly. It closes hard, the newish looking upper hinge seems worn as well, I can lift the door 1/4+ inch so I have a replacement pin/bushings.

Looking for tips for adjusting the door and replacing the bushing. I have watched some youtube videos and I am wondering if it's worth removing the front fender as its already a put together car.

Attached are some pics.


All times are GMT -4. The time now is 09:13 PM.