PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   70-73 Firebird & TA TECH (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=437)
-   -   Looking for all door seals and trunk seal (https://forums.maxperformanceinc.com/forums/showthread.php?t=843620)

cnc 08-27-2020 06:26 PM

Looking for all door seals and trunk seal
 
I also have this in the wanted section but...I’m looking for some replacement seals for my 73
Need door trunk etc.....lmk what u guys have used with good results ...thanks Chris

jwcfbd 08-27-2020 11:49 PM

When I replaced that seals on my 67 Firebird I got them through Classic Industries.

cnc 08-28-2020 06:41 AM

Quote:

Originally Posted by jwcfbd (Post 6173323)
When I replaced that seals on my 67 Firebird I got them through Classic Industries.

Hi were they OER

cnc 08-28-2020 07:35 AM

Also see Metro has a kit 5 piece both doors and trunk for like $206 then on eBay same kit from another seller half the price made by metro....

Norwood 08-28-2020 09:18 AM

I used a set of Fairchild door seals recently. Very nice product, doors closed like factory. I Highly recommend them based on my experience. https://www.jegs.com/webapp/wcs/stor...ild+Automotive

77 Canamman 08-28-2020 11:46 AM

I will have a NOS trunk seal available in a couple of days if you want to go that route.

Norwood 08-28-2020 12:51 PM

Quote:

Originally Posted by 77 Canamman (Post 6173412)
I will have a NOS trunk seal available in a couple of days if you want to go that route.

Always the best route, if you can afford it.

cnc 08-28-2020 07:05 PM

77Canamman pm sent...

cnc 08-28-2020 07:23 PM

Quote:

Originally Posted by Norwood (Post 6173373)
I used a set of Fairchild door seals recently. Very nice product, doors closed like factory. I Highly recommend them based on my experience. https://www.jegs.com/webapp/wcs/stor...ild+Automotive

What about Fairchild or others for the roof rail seal that attaches into the body???

https://www.carid.com/fairchild/roof-weatherstrips.html

Norwood 08-28-2020 07:34 PM

I only can vouch that the door seals are very good. I have good GM window seals

cnc 08-28-2020 07:44 PM

Quote:

Originally Posted by Norwood (Post 6173517)
I only can vouch that the door seals are very good. I have good GM window seals

Ok thanks ...

cnc 08-28-2020 07:54 PM

Quote:

Originally Posted by Norwood (Post 6173373)
I used a set of Fairchild door seals recently. Very nice product, doors closed like factory. I Highly recommend them based on my experience. https://www.jegs.com/webapp/wcs/stor...ild+Automotive

Just ordered a set from Rockauto shipped to my door $66 Canadian.

cnc 08-28-2020 07:58 PM

Now for the roof rail/window seals....

cnc 08-28-2020 08:50 PM

See these on eBay
https://www.ebay.com/itm/1970-81-GM-....c100667.m2042

77 Canamman 08-29-2020 07:50 AM

I used their belt/window seals on my 1973 Formula 455 with the large stainless trim on the belt line. They fit well.

cnc 08-29-2020 12:18 PM

I actually have aset of Fairchild sweep with the chrome trim...I bought them from4004 speed I was going to remove the decor trim from the car but have now decided against it....so I will selll these and go back to the original style for replacement ...I need all 4 pieces for the doors inner and outer....

cnc 08-29-2020 12:19 PM

Quote:

Originally Posted by 77 Canamman (Post 6173602)
I used their belt/window seals on my 1973 Formula 455 with the large stainless trim on the belt line. They fit well.

Im also looking at Steele rubber which I have been told fit well too
https://www.steelerubber.com/cart
Parts place I assume???
https://www.ebay.com/itm/1970-81-GM-....c100667.m2042

jwcfbd 08-29-2020 01:40 PM

Quote:

Originally Posted by cnc (Post 6173355)
Hi were they OER

yes they are

Formulabruce 08-29-2020 11:21 PM

Based on 4 cut cross sections of Trunk seals and fit, I have found that the 1A auto trunk seal lays down in the gutter the best and seals properly. These are better fitting than what GM was selling in 1982. In Video you can see how well this conforms to the trunk channel/ gutter.
https://www.1aauto.com/1970-81-chevr...36/258266/1973
video here > https://www.youtube.com/watch?time_c...ature=emb_logo

cnc 08-30-2020 06:53 PM

Bruce u r happy with them then .....good to hear.
It’s over $83 US plus any border stuff to get it here....not gonna happen.....


All times are GMT -4. The time now is 01:00 PM.