1965 tempest Frame mount locations.
Can one install a tempest 66/69 ohc-6 in a 1965 tempest? I have the 66 frame brackets, but how will I locate them on the frame? Any suggestions as to the locating dimensions? Have Fun, DANI10
|
OHC in a '65 A-Body
5 Attachment(s)
Several have been done but I can't say if the Frame Brackets were a direct bolt-in.
All the A-Body Frame Brackets are the same '66-'69. Lay one on the cradle and see if any of the hole line up. If not I would suggest setting the Engine and Tans in the car to determine the best fitment/placement. I know it's a PITA but likely the best way to be sure rather than guessing. |
Measurements
Here are some measurements I recorded for shipping that may be of help.
https://live.staticflickr.com/65535/...32bd3ed7_c.jpg |
Thanks for the info Jeff. The engine dimensions will be very helpful. The thumbnail pictures will also help. I think I will mockup the setup with the engine and transmission in place with motor mounts and frame brackets in place to see what I have to deal with. Cheers and Have Fun. DANI10
|
Jeff, that picture and dimensions are just sickeningly too neat and clear! You obviously have neat privilege and therefore you should apologize humbly to us oppressed and victimized messy types...
|
Isn't it great to have such precision documentation to make life much easier. Thanks to Jeff Hamlin. Cheers, and Have Fun, Dani10
|
All times are GMT -4. The time now is 07:01 AM. |