WTB 1968 Firebird roller
 

Looking for a 1968 Firebird roller have about $10,000 for the right body. Thanks

Probably help to know EAXCTLY what you're lookin for.

For example:

(1) Is it for a street resto build ?

(2) Is it to build a modified street/strip car ?

(3) Need body work already done ?

(4) Must it be rust free ?

(5), If not, how much rust can you live with ?

(6) Are you willing to buy a running car, in order to get the body you want ? The reason I ask this is because I've seen some pretty decent lookin bodies, with cheap 350 sbc crate engines, for a reasonable price.

IMO, finding a really nice, rust free '68 Bird body, for $10k or under, is unlikely, nowadays. But, stranger things have happened.

Here's what appears to be a former race Bird. Might work for a modified street/strip project, but will take lots of work & $$$$$.

https://classics.autotrader.com/clas...bird/100863687

Don't have a clue where the car is located, if it's still for sale, or what shape it's in. If it's still for sale, it may be in bad shape, cause it's been listed for quite a while.

If you can stand a '67, here's a driver for $13k.

https://www.cargurus.com/Cars/l-Used...ting=205654795

This ad is probably bogus, or car is either sold or doesn't exist, since price is too low for described '68 Bird.

https://www.carsforsale.com/vehicle/details/42755762

Ok it must be rust free or very little. 350 car is fine with or without motor is fine also. Would like no a/c but I will consider all. Thanks

Rear body panel looks funky but it is in your price range and not too far away for you to pick up - https://buffalo.craigslist.org/pts/d...583841859.html

https://images.craigslist.org/01515_...JP_600x450.jpg

Thanks but I don’t think that’s the one.

Man, I'd be a little nervous about the temper of the sheet metal on that one.

https://i.ebayimg.com/images/g/oUUAA...QK5/s-l500.jpg

Wow $7000 for that one seems a little high the chances of warped panels is pretty high. And it looks to be a 350 car.

Still looking for nice roller

pm sent

On Reno, Nevada craigslist is a '68 roller for $4,400. Includes extra parts the ad says.

still looking?

Yes still looking

How about a '67?
I like this one...Red on Red 400 supposedly. Not much detail at all as far as the missing parts but looks solid
https://www.ebay.com/itm/1967-Pontia...kAAOSwTVpgbQmx

I’m looking for a good clean body that one is to far apart for me. Thanks for looking

I believe I have what you're looking for. I have owned it for over 10 years. Clear Ohio title in my name. Car has had the quarters, tail panel, deck filler and outer wheelhouses replaced. Body is bare sitting on a body cart. Frame has been restored with energy bushings. PM me your number and we can discuss.