Speed Master Heads and Intake
 

Speed Master Heads and Intake New In Boxes
1500 plus shipping

Location?

Southern Ca . Hesperia 92345

What cam are these setup for? Roller? Or Flat Tappet

the web site says Hyd Flat RA IV
I was going to have them set up for Hyd Roller

SPECS:

Cylinder Head Material: Aluminum
Cylinder Head Finish: Natural
Combustion Chamber: 72cc
CNC-Machined Combustion Chamber: Yes
Intake Runner: 215cc
Exhaust Runner: 175cc
CNC-Machined Intake: No
CNC-Machined Exhaust: No
Intake Port Shape: Ram Air IV
Intake Port Location: Standard
Exhaust Port Shape: Ram Air IV
Exhaust Port Location: Standard
Spark Plug Style: Straight
Comp. Valave Job: Yes
Intake Valves Included: Yes
Intake Valve Diameter: 2.110 Inches
Exhaust Valves Included: Yes
Exhaust Valves Diameter: 1.660 Inches
Valve Springs Included: Yes w/Dampner
Maximum Valve Lift: 0.580 Inches
Outside Diameter of Outer Spring: 1.450 Inches
Valve Cover Mounting Style: Center & Perimeter Bolt
Accessory Bolt Holes Drilled: Yes
Intake Valve Angle: 14 deg.
Exhaust Valve Angle: 14 deg.
Valve Seat Machined Style: 3 Angle
Oiling Style: Through Pushrod

Also comes with Retainers, 10 Degree Lock Rings and Bronze Valve Guides

Still available? Interested

THANKS , Bill

Yes they are

SOLD!