PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   SOLD Parts (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=491)
-   -   1967 1bc engine & trans. (https://forums.maxperformanceinc.com/forums/showthread.php?t=862824)

Jeff Hamlin 11-12-2022 07:51 PM

1967 1bc engine & trans.
 
Just saved another one.
Running/Driving when pulled, said to be running well.
They pulled it out for a 455 :(
Spins effortlessly and I'm going to see if I can fire her back up.
No Air Breather or Fan, but everything else is here.
$350 AS IS, This will change as I move forward with it.

https://live.staticflickr.com/65535/...81ca449b_k.jpg

Jeff Hamlin 11-20-2022 07:00 AM

Cleaned it off, Checked the oil (Looks surprisingly good) Spun it around nicely Compression felt good.
Going to change the Plugs & some Hoses and see if we can't fire it up, if all goes well I'll change the oil and give it a minor tune-up.

Jeff Hamlin 11-25-2022 05:29 PM

PROMISING
 
Ran jumpers off my truck just to see if she had any life.
(Click image to see a sad video clip) ;)
Now I'll go ahead and wire it up.

https://live.staticflickr.com/31337/...8fdb7fa4_b.jpg

Jeff Hamlin 11-26-2022 07:47 PM

Surprise Surprise Surprise...
 
That carb was full of crud, I didn't think it would go so easy.
This needs a home. Talk to me.

Click on the image to see vid;

https://live.staticflickr.com/31337/...93dfb938_k.jpgIMG_4463 by J. Hamlin, on Flickr

Jeff Hamlin 12-04-2022 06:50 PM

WHAT CAN YOU GET FOR $500
 
A 1967 OHC 6 1BC Engine and Trans.
Was told it ran and it does.
Changed the oil and put a gauge on it. 30/35 PSI.
Mileage unknown.
Fuel pump strong.
Starter Strong.
Carb surprisingly runs fair but could clearly use an overhaul.
Complete with ST300 Automatic Transmission.
Missing Air Breather and Trans Dipstick.
Have a Fan to go with it.
$500 obo
Talk to Me! This needs a home.



https://live.staticflickr.com/31337/...419ce4ea_b.jpgIMG_4490 by J. Hamlin, on Flickr

gtospieg 12-04-2022 09:00 PM

Hey Jeff...If you sell this and someone (or you) needs the dipstick I should have one or two. I scrapped 2 ST300 trannys and kept the dipsticks and tubes as well as a lot of the guts. The trick would be finding them in the barn. GLWS

Jeff Hamlin 12-05-2022 07:11 AM

If you happen upon one I would love to have it.
I have a rubber cap on the tube now but rather the stick.
Thanks.

gtospieg 12-05-2022 08:21 AM

Jeff, I will try to find one next time I'm at the barn. Hopefully soon, it's getting pretty cold here and no heat in the barn.

camerjeff 12-06-2022 10:19 PM

Jeff I wish you were closer, that engine would make a good place holder for my Firebird while I rebuild the original engine

Jeff Hamlin 12-07-2022 07:31 AM

ROAD TRIP !
 
Quote:

Originally Posted by camerjeff (Post 6391401)
Jeff I wish you were closer, that engine would make a good place holder for my Firebird while I rebuild the original engine

... :D

Jeff Hamlin 12-09-2022 07:11 AM

SOME EXTRAS TO ADD
 
I have a head & better carb off another '67 engine that I will include.

Jeff Hamlin 12-18-2022 08:23 AM

Waiting for Adoption ;)

https://live.staticflickr.com/65535/...13575017_k.jpg

Jeff Hamlin 01-14-2023 05:20 PM

SOLD SOLD SOLD.

Look for it soon in a 1937 Pontiac :)

Thank You, Bill.


All times are GMT -4. The time now is 05:43 AM.