PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   93-02 Transmission Tech (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=562)
-   -   1969 Turbo 400 Shaft Seal Replacement (https://forums.maxperformanceinc.com/forums/showthread.php?t=828980)

1969GiPper 04-20-2019 12:08 PM
1969 Turbo 400 Shaft Seal Replacement
 
Can the seal for the gear selector shaft located in the drivers side of the turbo 400 case be replaced without dropping the trans pan? Is a special tool required?

1969GiPper 04-22-2019 08:40 AM
Anyone?

694.1 04-22-2019 10:50 AM
The TH 350 can be done with a tool, best wishes on the 400.

stevep 04-22-2019 07:02 PM
The ST-300, THM 200, 350, 400, 700 & 4L60 all use the same seal and the same removal tool.
https://www.napaonline.com/en/p/BK_7769250

1969GiPper 04-23-2019 08:18 AM
Quote:
Originally Posted by stevep (Post 6016027)
The ST-300, THM 200, 350, 400, 700 & 4L60 all use the same seal and the same removal tool.
https://www.napaonline.com/en/p/BK_7769250
Thank you.


All times are GMT -4. The time now is 02:35 PM.