Wanted: 1967 230 ci 3.8 crankshaft
Anyone happen to have one they would like to sell? Shipping would probably be to 58201 and I could arrange Fascenal shipment. Thanks.
|
I believe I have one under the bench, Let me look and I'll let you know.
Shipping may be a killer as I'm on the East coast. |
If Jeff can’t help you I can.
|
Let me know what you find. I'll also see if there are any other items I may need. Going to Detroit and Chicago (Woodward cruise) this summer so it would also be possible to get it shipped there. Thanks.
|
5 Attachment(s)
Pulled out my last 230 Crank. Its been in dry storage and coated with oil so she covered with dirt. No damage and should clean up no issue. I don't keep parts if I don't think their not worth it.
Let me pull the out the other parts you inquired about and I'll get right back to you. Thanks |
Pan & Rod(s)
4 Attachment(s)
Real nice Pan and a bin of 230 Rods.
|
Hey Jeff, what do you want for the pan and rods? I could pick them up at Norwalk in Aug. if you are attending.
|
Jeff,
Sorry the pan and a rod were/are for Rebel. Do you need 230 Rods? |
I may, I have a set of the old group buy 250 forged rods, but I sold almost all of my 230 parts years ago. Then bought a 230 powered bird that needs a engine rebuild
|
Jeff R, Your 250 rods should work for your 230, unless they are special order. OHC 6 rods are interchangeable between the engines and years. There were variations to them and should not be mixed and matched unless they are confirmed by weight and appearance.
|
1 Attachment(s)
Jeff, Jeff is correct. I found some old notes.
Let me know if you may still need. Jeff :D |
1 Attachment(s)
PM sent with shipping info.
Thanks. |
Parts are on the way. PM sent.
Thanks again. |
All times are GMT -4. The time now is 02:39 PM. |