WTB Ohc6 250 crankshaft gear. 1968 1969
 

Hi guys I’m looking for a 68- 69 ohc6 250 crankshaft gear. My old one has been machined for a new key groove. Please see pictures.
Thank you. Please message or call.
John 213-435-5151

Can't you just use the correct groove? Or maybe it is damaged. I should have one around.

Crankshaft gear
 

Hello no the original groove looks like the key moved side to side and gouged the hole in the gear and someone machined another groove in the gear. Please see picture. I’d rather use a gear with the factory groove so I know the timing and belt position is dead on. If you please can you check to see if you have another 250 gear ? you can sell me?? Thanks John

John
I can get one to you. Just send me a private message with your address.
Chris

Also, have a 250 Crank Sprocket if something doesn't work out.

Thank you

I found a crank sprocket to send to John but it was in a box with a variety of spare parts.

My question is are there 2 different sprockets 230 and 250 or are the all the same?

If different how can I tell if this is a 250 crank sprocket?

Thanks
Chris

I think I found the answer inner diameter on the 230 is 1.25” and the 250 is 1.3125” (1 1/4” v. 1 5/16”).
Sound right?

Correct the 250 Crank snout is larger.

250 Crankshaft Gear
 

Update: thank you 66sprint for sending me a crankshaft gear you too Jeff for helping out really appreciate the help would have never found a gear here in Los Angeles.

Glad to help out. Let me know if you need anything else and keep us posted on the build.