Aerospace Components Vacuum Pump Kit
 

I have a Aerospace vacuum pump kit that I bought and never used. The kit includes a pump, that was rebuilt by them, and everything else is new. I did mount the mandrel on a motor and ground a little notch on the back for clearance (as you can see in the picture) but never mounted anything else or run any of it. I decided to go a different route. $600 shipped.

Here's the description from their ad of what you get:

THIS IS A REBUILT AEROSPACE COMPONENTS VACUUM PUMP,THESE PUMPS PULLS ABOUT 13'' to 18" OF VACUUM AT 3000 RPM'S AND 38 CFM !!!This a Black hose and fitting edition. THE PUMP IS REBUILT BUT ALL OTHER PART ARE NEW !! ALL BILLET ALUMINUM CONSTRUCTION!!

THIS IS WHAT YOU GET IN THE KIT:

1. ONE 3 VANE VACUUM PUMP WITH A 5 INCH PULLEY AND MOUNTING BRACKET.
2. VACUUM BREATHER TANK.
3. MANDREL DRIVE SYSTEM WITH A 3 INCH AND 5 INCH PULLEYS.
4. VACUUM PUMP RELIEF VALVE.
5. VALVE COVER BUNG.
6. 5 FT OF BLACK BRAIDED -12 AN HOSE.
7. (3) STRAIGHT # 12 AN HOSE ENDS.
8. (1) 90 DEGREE SWIVEL -12 AN HOSE END
9. GRADE 8 HARDWARE INCLUDED.
10. 100% MADE IN THE USA!!!!

11. ALL YOU NEED TO SUPPLY IS THE V-BELT.

PM sent

PM replied

Sold.