looking for 400 block
I am looking for a 400 block and crank for a very mild build. I gave a 76 400 block and crank years ago to a fellow member. Of course now 10 years later I need one. I want to take the street car and make it mild. Looking to go on 500+ mile trips with it. Right now it is running 11.8's at 3900lbs.. Not really a long distance cruiser.
Have a lot of people trying to talk me into an LS but would like to keep a Pontiac in it. I am in south NJ. |
Have a 71 400 just out of the machine shop hot tanked magged can bearings freeze plugs cut .40 asking 650.00
Sent from my moto z3 using Tapatalk |
I have a standard bore ‘73 400 (988) that was magged and hot tanked. I since picked up a “71 455 so the 400 sits on a stand stored in my enclosed trailer waiting for a project. Obviously disassembled but have crank etc. PM me with any questions if you’re interested.
|
I have a '557 block that was freshly hot-tanked and bored (forgot size) just before I got it. Comes with crank and flexplate. It's just collecting dust in my garage. Would take $200 for block/crank/flexplate just to make more space in garage. Located just south of Baltimore near BWI airport. PM me if interested.
|
Have a 76 400 6x longblock in Pa. $250.00 In Pa.19002
|
Finally some reasonable pricing on pontiac blocks!!!
|
Have a few 400 blocks in northern NJ. Mid - later 70s.
|
I have a 72 rough bored for .060 over and the original N crank I also have a couple armasteel cranks also. $300 for block and crank
|
All times are GMT -4. The time now is 11:52 PM. |