|
1964 Sport Wood Wheel Summer 2004
1964-67 Correct Blue Fuel Filters Spring 2004 1967 GTO Full Quarter Panels 1967 GTO RH headlight Bezel available 1968-69 Endura Bumper available 1969-70 RA flapper Housing available 1970 GTO fenders 1970-73 FB/TA Headlight Bezels (in stock) 1971 Honeycomb wheel center cap (Jan 2004) 1972 GTO Ducktail Spoiler (in stock) 1974-76 FB/TA Headlight Bezels (in stock) [This message was edited by Ccass on December 04, 2003 at 11:47 PM.] |
Great list, awesome board.
Any update, estimate or timeframe on those "71 Honeycomb center caps from that sample? |
Hey sounds great about that stuff but how about some replacement billet door pulls for all the 79 to 81 camaros and firebird and think vettes..the factory or aftermarket ones just plain break way too easily.And how about a reasonable priced ta aluminum dash or maybe something for the ta that look sharp with autometer gauges to replace the factory junk.??
Don't mean to hijack your thread. 80TAWS6,400,edelbrock carb,accel wires,dual exhaust,dynomax mufflers,3.42 strange gears,turbo 400,B&M converter/shift kit/etc., polygraphite everywhere,draglites. 14.24 at 97.40mph 2.21 60ft tazzo vpc. 1900 ft altitude. 99TAWS6 ..lots of mods.13.35 at 109 2.27 60ft tazzo vpc. 96 Z28 camaro vert,14.66 at 98.3 with 2.47 60ft |
Way to go, Chris! Even if these parts don't all happen, there's some great stuff coming!
But . . . How about the 1 1/8" rear anti-roll bar for A-bodies I posted under the "parts you wouldd like to see reproduced" topic? I copied and pasted my original post below (in quotes): "I've been casually looking into having the 1 1/8" (1 1/4") '72 GTO WW5 rear anti-roll bar reproduced. I don't care much for the aftermarket bars which don't replicate the "look" of the OEM bar. With good used OEM bars going for $500.00+, I figure it wouldn't be unreasonable to have a few made and test the market, so to speak. Thanks to oPh, I've got a good used OEM bar to use as a pattern. I contacted Addco, but they were NOT interested. A while back, someone on here posted this link to Saner Performance Fabrication: http://www.sanerperffab.com/ Neither phone number listed on the page works, and several e-mails have gone unanswered. Does anyone have better info on how to reach Saner, or know of another source for a reproduction bar? What makes me mad is that through the years I prolly bought at least a half-dozen of these brand new over the counter! Two of them snapped at the RH rearmost control arm bolt hole, and the rest went with cars I sold off through the years." Is no one else interested in this project??? As I mentioned above, I've had this bar on several A & G bodies in the past and it sure makes them handle well! I just can't stomach the appearance of the aftermarket style rear bars. Anyone? Lloyd '72 Formula 455 - TH400, 3.08 posi, A/C, Y99, tach & gauges, AM-FM stereo, 8-track, Formula wheel, etc.; Lucerne Blue, Blue Deluxe Int; 12.96 @ 104 MPH @ the '03 PSN's 1970 GTO, 455HO, TH400, A/C, 3.07 peg-leg, AM, tach/gauges, tilt wood wheel & cruise, PDB, P/S, power LH seat, rear defog, etc.; Palomino Copper w/ Sandlewood buckets and Sandlewood Cordova top; All there but in need of resto Soon a body-off resto will begin on a 72 GTO 455HO, TH400, A/C, etc.; Sundance Orange with Ivory buckets |
1970-73 FB/TA Headlight Bezels
Demand is high for bezels, hopefully this is one of the first offerings from the list!! 1973 SD455 T/A 1979 S.E. T/A http://community.webshots.com/album/16587603rOyvmFCiHs |
Chris:
Go here . . . http://forums.performanceyears.com/g...11&m=965606814 Later, Lloyd '72 Formula 455 - TH400, 3.08 posi, A/C, Y99, tach & gauges, AM-FM stereo, 8-track, Formula wheel, etc.; Lucerne Blue, Blue Deluxe Int; 12.96 @ 104 MPH @ the '03 PSN's 1970 GTO, 455HO, TH400, A/C, 3.07 peg-leg, AM, tach/gauges, tilt wood wheel & cruise, PDB, P/S, power LH seat, rear defog, etc.; Palomino Copper w/ Sandlewood buckets and Sandlewood Cordova top; All there but in need of resto Soon a body-off resto will begin on a 72 GTO 455HO, TH400, A/C, etc.; Sundance Orange with Ivory buckets |
Hey Lloyd....
Why is it that we can't get that exhaust system of yours in production.....hmmmm? http://forums.performanceyears.com/g.../icon_wink.gif http://forums.performanceyears.com/g...on_biggrin.gif 1973 SD455 T/A 1979 S.E. T/A http://community.webshots.com/album/16587603rOyvmFCiHs |
Larry:
Still LOTS more testing to be done before the design can be finalized and the system marketed. Gotta get off my a$$ and get to work!!! Way too much going on with my Mom and Dad right now, but I'm still hoping to finalize everything by the end of this year (hopefully) http://forums.performanceyears.com/g...s/icon_mad.gif Sorry for all the delays, guys. I know some of ya'll have been looking forward to an alternative to the Flowmaster transverse system. Later, Lloyd '72 Formula 455 - TH400, 3.08 posi, A/C, Y99, tach & gauges, AM-FM stereo, 8-track, Formula wheel, etc.; Lucerne Blue, Blue Deluxe Int; 12.96 @ 104 MPH @ the '03 PSN's 1970 GTO, 455HO, TH400, A/C, 3.07 peg-leg, AM, tach/gauges, tilt wood wheel & cruise, PDB, P/S, power LH seat, rear defog, etc.; Palomino Copper w/ Sandlewood buckets and Sandlewood Cordova top; All there but in need of resto Soon a body-off resto will begin on a 72 GTO 455HO, TH400, A/C, etc.; Sundance Orange with Ivory buckets |
Chris, at Norwalk, you made mention of the possibility of someone reproducing the 65 GTO grills in a lighter plastic material. Anything happening on that front ?
- Jim Doran -Some Pics of my 65 |
Everyone please post questions about new product inquiries not related to the above list in the other topic. I'll answer them there if I can. thanks.
--------------------------- Fool around, Get hurt, don't come crying to me. |
<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by 1971GTO:
Any update, estimate or timeframe on those "71 Honeycomb center caps from that sample?<HR></BLOCKQUOTE> I should be getting a sample very soon. I will start a separate topic at that time. Should be in November. --------------------------- Fool around, Get hurt, don't come crying to me. |
sweeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeet
|
70 GTO fenders are very interesting. Any info on if these are a good possibility to get done? I sure would love that option. http://forums.performanceyears.com/g.../icon_wink.gif
http://www.mensexpo.com.futuresite.r...s/tigeranm.gif GR-RRR! |
I updated a few dates and added the 72 spoiler
--------------------------- Fool around, Get hurt, don't come crying to me. |
I saw The Parts Place selling a ducktail repop on ebay already. Is this the same one or are they making thier own? here is a link
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2441841703 http://www.mensexpo.com.futuresite.r...s/tigeranm.gif GR-RRR! |
Cool!
--------------------------------------------------------- "GTO? "Get Tools Out!!!" --------------------------------------------------------- http://kurtspontiac.homestead.com/files/goatintach.gif http://www.kurtsplates.homestead.com/files/goatin.jpg |
Thank's Chris. 428GTO I think someone said a while ago that it was the same one, but I'd rather spend my money with PY(no offense to the parts place but if Chris offers it I would rather support the board for all it gives us).
http://kurtsplates.homestead.com/files/428LMNS.jpg Nothing is real if you don't believe in yourself-Rocky Balboa In order to be old and wise, you must first be young and foolish |
Any word on those full quarters for the 1967 GTO yet?
|
Any ides on what the price may be for the '70 gto fenders if they do get repro'd?
|
Chris, any word yet on the '70 GTO fenders?
|
| All times are GMT -4. The time now is 05:45 AM. |