PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   Pontiac - Street (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=418)
-   -   Headers,what are my choices 400 67 CAT (https://forums.maxperformanceinc.com/forums/showthread.php?t=405798)

Brent67CAT 09-23-2003 05:17 PM
I have a 67' 4DR HT Catalina, I was thinking about a set of headers and dual exh. After looking in the bay it doesn't look like there is much room in there for headers.I have a stock 400 2bbl with 143 heads and single exh right now. Any suggestions? Thanks Brent

Brent67CAT 09-23-2003 05:17 PM
I have a 67' 4DR HT Catalina, I was thinking about a set of headers and dual exh. After looking in the bay it doesn't look like there is much room in there for headers.I have a stock 400 2bbl with 143 heads and single exh right now. Any suggestions? Thanks Brent

pontiac6269 09-23-2003 06:01 PM
The Headmen shorty headers might fit. Is the steering linkage in the front or back of the engine crossmember? I have a 62 Grand Prix and I made some headers fit from a 68-72 GTO Lemans or Tempest fit. Lots of dents and the pipes hang to low so thewy drage on the ground. Good luck.

Eric

62 Grand Prix
400,Turbo400
2.73 Gears,4040lbs
[email protected]

69 GT0 (still in the garage)


All times are GMT -4. The time now is 07:09 PM.