PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   The Body Shop TECH (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=417)
-   -   PPG's DP90 (https://forums.maxperformanceinc.com/forums/showthread.php?t=416122)

darren 08-04-2002 08:25 PM
I've never used this primer before and was wondering if it can be applied over freshly sandblasted steel like the trunk floor and behind the quarter panel before I install the new quarter I all so like that it is black like the original primer on the floor and fire wall
Thanxs for any info
Darren

darren 08-04-2002 08:25 PM
I've never used this primer before and was wondering if it can be applied over freshly sandblasted steel like the trunk floor and behind the quarter panel before I install the new quarter I all so like that it is black like the original primer on the floor and fire wall
Thanxs for any info
Darren

A1Judge 08-09-2002 07:29 AM
YES,,, PPG DP Epoxy Primer can be applied to bare steel. In fact, that is what it is intended to do. Just make sure ALL rust is removed, clean the surface with grease and wax remover and spray.

DC


All times are GMT -4. The time now is 03:43 AM.