PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   Pontiac - Street (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=418)
-   -   cheap 4-speed? (https://forums.maxperformanceinc.com/forums/showthread.php?t=424958)

chris cook 02-21-2003 02:53 PM

i am looking for a cheap 4-speed for my 400. i was thinking about getting a muncie but those cost a lot to get. i am just wondering what is a good yet cheap trans to get that can stand up to about 400hp and maybe 450ft/lbs? As long as it will last a while until i could upgrade to something better. i am also a student and dont have a lot of cash that is why i am asking you guys this. thanks.

chris cook

chris cook 02-21-2003 02:53 PM

i am looking for a cheap 4-speed for my 400. i was thinking about getting a muncie but those cost a lot to get. i am just wondering what is a good yet cheap trans to get that can stand up to about 400hp and maybe 450ft/lbs? As long as it will last a while until i could upgrade to something better. i am also a student and dont have a lot of cash that is why i am asking you guys this. thanks.

chris cook

tom s 02-21-2003 03:50 PM

I dont think there is really anything out there that will take 450 TQ and be cheap.Tom



61man 02-21-2003 05:52 PM

me either,
I used to go through t-10' with a 389 and 348hp.

http://kurtspontiac.homestead.com/Pre1964Pontiacs.html

Blackcat 02-21-2003 10:14 PM

Nope! No cheap ones that will fit your bill!
Munci's or the later T-10's will run 400 for a used one of unknown abuse and then figure 250+ for a rebuild! http://forums.performanceyears.com/g...s/icon_eek.gif

Usually I'm found working on my Pontiac. If you want to find me Look for the white picket fence and all the old Pontiacs parked outside. And the half dissembled engine sprawled all over the driveway!
http://www.sensible-net.com/kevin/plates/wagoon.jpg

Bartman 02-22-2003 08:06 PM

I heard that some company makes a HD case for Muncies that really help the durabilty. Original cases will twist and bind. Makes quick shifts hard to do consistantly.
A chrysler HD A-833 will handle the abuse if you don't mind the weight. You might have to do some modifications for it to fit though.
Bartman

Ponies run but Birds fly

chris cook 02-23-2003 09:19 PM

what if i decrease the power a little or is there nothing i can really use that is cheap? thanks

chris

Half-Inch Stud 02-24-2003 07:48 AM

M-21 HD will survive the 455 (has a TH400 output shaft size, and a fine-spline inputr shaft, and the 1"countershaft support) on the street. Butt,

...add slicks and it's crushin roulette.


All times are GMT -4. The time now is 07:28 AM.