|
I am taking my car to get dyno tuned on Tuesday on a dynojet chassis dyno. What kind of horsepower and torque do you think I will make? Car is a 4 speed w/ 3.70 rear.
My engine combination is as follows: 461 - 400 block .035" over Ross pistons dished for 10.25:1, 4.25" stroke, and 6.8" BB chevy rods. Edelbrock 72cc heads (don't have flow numbers but they have had the ports cleaned up and port matched) Ultradyne Cam with 247 @ .050 intake and exhaust. 110 LSA. Installed at 104, .530" lift. Torker II intake w/ 850 Demon carb. Dougs headers into 3" pipes and 3" Dynomax ultraflow mufflers. Thanks |
I am taking my car to get dyno tuned on Tuesday on a dynojet chassis dyno. What kind of horsepower and torque do you think I will make? Car is a 4 speed w/ 3.70 rear.
My engine combination is as follows: 461 - 400 block .035" over Ross pistons dished for 10.25:1, 4.25" stroke, and 6.8" BB chevy rods. Edelbrock 72cc heads (don't have flow numbers but they have had the ports cleaned up and port matched) Ultradyne Cam with 247 @ .050 intake and exhaust. 110 LSA. Installed at 104, .530" lift. Torker II intake w/ 850 Demon carb. Dougs headers into 3" pipes and 3" Dynomax ultraflow mufflers. Thanks |
Tuned properly, I'm thinking you should see a minimum of 400-HP at the rear wheels.
http://kurtspontiac.homestead.com/files/bbaker.jpg |
| All times are GMT -4. The time now is 05:58 PM. |