Click below for a basic education on 64-66 Tripowers. http://www.netreach.net/~perfyrs/tripower.htm
Any additional info to "reply" is welcome.

Click below for a basic education on 64-66 Tripowers. http://www.netreach.net/~perfyrs/tripower.htm
Any additional info to "reply" is welcome.

Chris,

You're a prince amoung men. I've got a '66 tri-power with no power accessories. Because I've "upgraded" to 4 wheel disks I decided I had to go to an aftermarket power setup. (UPS delivered it today), but I hadn't paid attention on where the vacuum hose went on PB Tri-powers. Checked your posting and there, in the last picture, was the answer for the question I hadn't even asked yet. Do you also moonlight for the Psychic Hotline?

Anybody have any additional tripower pictures to add to this thread? Any help would be appreciated.

I have 2 65 Tri Powers and 1 66 Tri Power, they are not all complete. I have a 65 that has the original screen-foam type air cleaner. I also have a big car dual snorkel air cleaner that fits on a 65 Tri Power. I have a Chevy carb that looks similar to a 65 center carb. I can show you how to Identify a Pontiac center carb from a Chevy carb. If you are interested I can send some pictures.

top

---------------------------
Fool around, Get hurt, don't come crying to me.

I'm gonna bet Jim (jrdoran) has some pics to add. http://forums.performanceyears.com/g...on_biggrin.gif

I have a 65 tripower I am building. Does anyone know where the vacuum advance is supposed to hook up. It looks like the end carb in the 66 picture. Any info would be apprreciated>

I love the idea of technical articles and a repository of Pontiac or general Car knowledge which many people here have lots of!

James Fasso
[email protected]

'67 GTO Conv
"220, 221, whatever it takes."
Micheal Keaton as "Mr. Mom"

I have a bunch of "dirty pictures" of my tripower carbs before & during the rebuild including pictures of each carb from all angles sitting on the bench. If anyone is interested I can email them but there's too many to post here.
Chris's pictures of the complete setup on the manifold is about as nice as you can ask for.
I have included a couple pictures here of the carbs during disassembly showing how incredibly simple the Rochester 2bbl carbs are inside. I'm no engineer but I had no trouble rebuilding them using a good quality rebuild kit (from CarbKing) and they actually worked when I put them on my new motor http://forums.performanceyears.com/g...on_biggrin.gif.

http://kurtspontiac.homestead.com/TimSimpson66GTO.html

I have a bunch of "dirty pictures" of my tripower carbs before & during the rebuild including pictures of each carb from all angles sitting on the bench. If anyone is interested I can email them but there's too many to post here.
Chris's pictures of the complete setup on the manifold is about as nice as you can ask for.
I tried to include a couple pictures here of the carbs during disassembly showing how incredibly simple the Rochester 2bbl carbs are inside. Unfortunately, the files are too big but will try to trim them down so I can post them. I'm no tripower expert but I had no trouble rebuilding them using a good quality rebuild kit (from CarbKing) and they actually worked when I put them on my new motor http://forums.performanceyears.com/g...on_biggrin.gif.

http://kurtspontiac.homestead.com/TimSimpson66GTO.html

PS: That was a pre-rebuild photo.

http://kurtspontiac.homestead.com/TimSimpson66GTO.html

Tim:

Can you send me a picture of the drivers side showing where the vacuum advance hooks up?

Thanks
Peter

Here is a 65 Passenger side:

- Jim Doran -Some Pics of my 65

Here is a 65 Driver side:

- Jim Doran -Some Pics of my 65

Here is a pic of 65 with Metal Ram Air pan and power brakes.

- Jim Doran -Some Pics of my 65

more 65 setup pics
http://1968firebird.org/trip1.jpg

poncho68sa

[This message was edited by poncho68sa on February 26, 2003 at 09:47 AM.]

[This message was edited by poncho68sa on February 26, 2003 at 09:49 AM.]

#2
http://1968firebird.org/trip2.jpg

poncho68sa

soory so big, i can reduce them if needed http://forums.performanceyears.com/g.../icon_cool.gif

poncho68sa

Thanks for the pics guys. It looks like the vacuum advance goes to the front of the rear carb. Is this correct for a 65?

Thanks
Pete