PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   Non Pontiac Motors in Pontiacs (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=423)
-   -   Help! Vacuum diagram & Wiring diagram needed (https://forums.maxperformanceinc.com/forums/showthread.php?t=438837)

Guy Mazza 10-13-2001 07:52 PM

If anyone has, or can recommend a book/manual that has the engine/gauges harness diagram &/or Vacuum line/smog diagram for a 1978 Trans Am, Calif. equipped 403 Oldsmobubble. Most all emissions decals are available (except '78 403 T/A Olds) almost all manuals are avail...(again, except '78 T/A Olds) I bought a "Haynes" manual which is a frigging rip-off. All pictures were of Camaros and the wiring reads, "Typical engine harness". Anywho if anyone could help me out, I'd appreciate it!
Thanks in advance, Guy

Guy Mazza 10-13-2001 07:52 PM

If anyone has, or can recommend a book/manual that has the engine/gauges harness diagram &/or Vacuum line/smog diagram for a 1978 Trans Am, Calif. equipped 403 Oldsmobubble. Most all emissions decals are available (except '78 403 T/A Olds) almost all manuals are avail...(again, except '78 T/A Olds) I bought a "Haynes" manual which is a frigging rip-off. All pictures were of Camaros and the wiring reads, "Typical engine harness". Anywho if anyone could help me out, I'd appreciate it!
Thanks in advance, Guy

mike nixon 10-21-2001 11:08 AM

have you tried looking in a mitchell PROFESSIONAL series manual yet? if you can find a shop that has mitchell on demand internet service it may also tell you what you need to know. mike

Akio 12-26-2001 02:59 AM

LA County Libraries carry most year factory shop manuals in the science reference section. Bring some change for the photocopier. Also, if you can't find the T/A manual, try the big car manual for 1977 or 1978.

[This message has been edited by Akio (edited 12-26-2001).]

engineer 12-16-2002 10:33 AM

should have what you need. let me know if you are still looking.


All times are GMT -4. The time now is 12:31 AM.