is it possible to put it in?
and connect it with the th 400?

the thing is that i have 1 catalina with
no engine and one caddy 500 -72 engine
why dont put it together and use the car?

/stig sweden
always looking for more cars and parts on the
east cost of usa :cool: :D [img]smile.gif[/img] :confused:

is it possible to put it in?
and connect it with the th 400?

the thing is that i have 1 catalina with
no engine and one caddy 500 -72 engine
why dont put it together and use the car?

/stig sweden
always looking for more cars and parts on the
east cost of usa :cool: :D [img]smile.gif[/img] :confused:

It will work. A few guys here use the cadillac 472/500 in chevy pickup trucks (with turbo 400). You would probably be happier using a pontiac 455 in this application, however. There are more performance parts available for the pontiac.

yes that would be great
but i have a 72 caddy 500 and no pontiac 455
but its not a ffffffoooorrrdddd or mopar crap
anyway

big body regards
stig sweden :cool:

Farmer, this place says that they have swap kits for almost any vehicle to swap a Caddy engine.
http://www.cad500parts.com/

The Cad will work with the TH400... It is a direct bolt-in in that sense. The Cad has engine mounts at the front of the block however, so that will require some fabrication. The oil pan is another area of concern as you need a rear sump, although the Eldorado middle sump pan may work. The stock exhaust manifolds may also work but big block Chevy headers will fit with the addition of adaptor flanges. Look up The Cad Company out of Florida. I fabricated an oil pan and frame mounts to put a 500 in my 68 ElCamino. Very, very good engine.

Sanderson also makes shorty headers for the Cad 500, if you don't feel like fabricating your own. The stock style maifolds are very restrictive.

http://www.500cid.com used to be another source for this stuff.