need pics of Alt and PS assembly. Forgot how
 

Someone PLEASE send me pics UP CLOSE of how I put The Brackets on the Power steering pump and Alternator. For a 1966 GTO. Its been over a year since I pulled it apart and I chromed The brackets and forgot how they go,

Close up pics of drivers side of Engine Appreciated. Thanks.

I'll take a couple of shots for you this am.

Here are some from my recent rebuild project. Let me know if you need more

And a couple more

Hope these help also. Had to resize

Better I hope:)

Last three

The first picture is a back view of the power steering bracket showing the location of bolts and spacers. The bolts go through the front of the plate, through the spacer, and into the pump body. The second pic shows a front view of how the two pieces are oriented. I took the pictures because I knew I'd never remember how to get it back together.

power steering pump mounting
 

Hi, one question, how thick are the 2 spacers? Thank you, Pete

They are 11/32" thick (a short 3/8") and they measure 3/4" across. The hole is a hair larger than 3/8".

Power Steering Spacers
 

Hi, thank you for that info.
I am adding PS to one of my old cars & have to piece-by-piece the brackets together.

Does anyone know if a '71/'72 power steering pump will work on the older style brackets?

from my experience it was much easier to mount the bracket with the washers to the pump, before installing on the engine. just my 2 cents.

Thanks guys. I had the same question as vinnyragu and got my answer from your pics bobbyj1.