|
Rally Gauge Cluster Rebuild
5 Attachment(s)
First time poster looking for info and want to share my experiences. Got a few cars, this is my first GTO. Found a nice 69 low option Texas car (built in Arlington, owned in Dallas). Motor seized and was parked in 74 with 56K on odometer. Has a 455 in it now and just received the #'s matching engine from the rebuilder in Tulsa.
In the meantime I was attempting to add a rally cluster to the car and found one on ebay. I took some pix before I tore it apart but now need clarification on how the double thick nuts are used, couldn't tell from my pix. I think they are on the U shaped insulator but not sure. Can anyone confirm or share some pix of a cluster ? Here are some before pix....I'll post some in progress pix as I go. Thanks for any help. |
Additional before pix
4 Attachment(s)
I removed the goo that was some sort of foam and soaked the case in Eastwood rust remover then clear coated it.
|
I like the 140 speedo, good luck.
|
After cleanup
3 Attachment(s)
Begin Piecing it together....new Printed Circuit (may try to save the old one-had 3 cracks near the plug)
|
140 mph
I have a 140 mph one in mine too, I beleive it's from a '70
|
You are correct it is a 70 speedo, I am actually going to keep my 69 but was tempted to upgrade.
|
| All times are GMT -4. The time now is 02:35 PM. |