1/2" Fuel Pickup
 

I'm replacing the fuel delivery system in my '64 with 1/2 lines, new stock configuration tank, etc. I want to use a pickup with 1/2" line, but I cannot find one. Saw an article in Car Craft about replacing a gas tank in a Chevelle, and they used a pickup from InnovativeEngineering. I can't find any information about the company or who sells the part. I've also read the threads that address modifying a pickup with 1/2'" line, but I'd rather buy one. Any ideas?

Thanks.

I saw the same article as you did, but I was not able to locate the sender. I fabricated one using my existing sender and 1/2" copper flex. If you are able to located those senders, please post here. I'd buy one for sure... There are other posts on this topic somewhere in the archives...

Here you go gentlemen enjoy
http://www.magnumforceracing.com/sto...&Search=&Page=
thank you,
Russ

That is a Mopar company. The pickup is for a Mopar A-Body.

1/2" Pickup
 

Thanks, guys. I sent an email to the company asking if they knew of a source for GTO pickups. I'll letcha know what I find out.

FWIW. I fabricated a 1/2" pick up line in my 68 Firebird. Then I replaced it with a fuel cell due to fuel starvation issues and picked up a tenth and a half and 1.6 MPH. Personally, I would sump the tank.

oops sorry about that wrong link posted, let me find the right one.

Contact inline tube,Tom V turned me onto them several years ago when I was doing a 65 Lemans/GTO.They had the 1/2" pickup for the 65.Don't know but maybe fit 64 also.