65 66 harmonic balancer
 

O.K. I have a early style 66 harmonic balancer so from what I'm hearing the pulley goes on then the balancer sits in the pulley then the spacer sits on top and then the bolts go in IS THIS RIGHT?

No, I have, timing hub bolted to the crank, than the pulley, than the ring, than the balancer, than the bolts. The ring won't fit into the balancer if you tray to put it on last.

Hope this helps, I can get you a picture if needed.

Mark

65 66 harmonic balancer
 

If you have a photo that woulb be a big help the books I have dont even show the spacer plate Thanks Tom

I will get you a photo tonight of my assembly, unless someone beats me to it.

Mark

OK, Here are the pics, the first pic shows the crank hub, this is bolted onto the crack with that big crank bolt in the center.

The next picture shows the order which everything goes together, from right to left, you have the crank pulley, than the ring which fits inside the crank pulley, than the balancer which fits inside the crank pulley an sits on top of the ring, than you have 6 bolts to go through the balancer, ring, and pulley and screw into the crank hub.

Hope this helps

Mark

Thanks