PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   Suspension TECH (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=421)
-   -   Lees Power Steering (https://forums.maxperformanceinc.com/forums/showthread.php?t=553305)

old66tiger 03-07-2008 04:37 PM

Lees Power Steering
 
Anyone know if this guy is still in business? I tried the website but no luck.

67blackcherry 03-07-2008 06:25 PM

Lee's Pwr Steering...
 
If you're talking about Lee Manufacturing out here in So Cal...
818.768.0371
11661 Pendleton St
Sun Valley CA 91352
Hope this helps!

Roadbuster 03-07-2008 09:34 PM

My new Lee power steering box arrived last week. Very nice part.

I ordered it through Mark at SC&C. The last piece I needed to start on my front end replacement. :clap3:

Jon

PITTSBURGH 64 03-07-2008 11:02 PM

Mark at SC&C is the best!
http://www.scandc.com/

guccieng 03-08-2008 12:00 AM

i just ordered from lee a couple of months ago. ditto on sc&c!

old66tiger 05-13-2008 07:57 PM

Which way is better to go? Directly through Lee or through SC&C?

PITTSBURGH 64 05-13-2008 08:07 PM

I want through Mark at SC&C but I would checkout all avenues. After all its Lee who builds the box. You can't go wrong going through the people that built them..

I'm gald to see your taking this route, you'll love it!

gregneun 05-13-2008 08:32 PM

There's a lot of steering box info on the 442 site
 
The Olds guys have this to offer. I had mine rebuilt at Unique aut exchange in East LA.

http://www.442.com/oldsfaq/ofstr.htm

78 GHOST 05-14-2008 06:12 PM

Here's a link to another thread containing info. on who did my box. Ask for Chip. If you want cheap and fast, he is not for you. However, if you want to bolt in in and have zero problems, call Chip.

http://forums.maxperformanceinc.com/...highlight=chip

old66tiger 05-14-2008 09:00 PM

Dilemma, dilemma.....I am definitely going with a Lee box however they are suggesting to send in the pump too and have it calibrated to work with the new box. They say that the new box requires a bit more pressure and flow to work properly and they also want to make sure the system is totally clean. The biggest problem is that we are just getting into the summer season and with shipping, this sets me back 3 weeks or better. I was wondering if anyone here sent their pump in when they had their box made? Also, I can wait to next fall to have the pump gone through - however I need to pull the pump apart and clean it out to make sure there isn't any junk in it. Where is a good place to get seal kits?

old66tiger 05-17-2008 09:22 AM

I pulled the trigger thursday and ordered my new 800 series box and sent my pump in for evaluation and calibration. This ensures that my steering system operates to its maximum potential. The people at Lee were very nice to work with and took the time to answer all of my questions thouroughly. If this box works as good as I think it will, they will be getting a huge thumbs up and all of my future business.


All times are GMT -4. The time now is 04:26 AM.