Ferrea 6000 series valves, springs and roller cam
 

I have for sale the following roller set up used on KRE D Ports
5.2" 6000 series SS valves 2.11 intake 1.66 exhaust
Comp 919 roller springs and retainers
U/D 310/314 solid roller cam
If you want to upgrade your KRE D ports to a roller set up. This is the stuff. Used 1 season.
This roller cam is worth 50 HP over a 290 B6 solid flat on 310 KRE D ports and a 463.
500.00 plus shipping

Can you list complet cam specs?

310/314, 279/283 @ .050, 200/204 @ .200, .4267 lobe, 108 LSA

Intake open 51 BTDC close 79 ABDC. Exhaust open 89 BBDC close 45 ATDC. That is with the 4* advance, 104 ICL

TTT

Will separate if interested. The valves and springs used 1 season with approx 80 runs.
1 set of 16, 2.11 x 5.2" 45* Ferrea SS 6000 series valves $90.00
1 set of 16, 1.66 x 5.2" 45* Ferrea SS 6000 series valves $90.00
1 set of 16, Comp 919 springs with retainers $150.00
U/D 310/314 solid roller cam. $225.00
Plus shipping

Bump

These are RA1V length valves. Will work with e heads as well.
No one wanting to step up to a solid roller cam?

1 set of 16, 2.11 x 5.2" 45* Ferrea SS 6000 series valves $75.00
1 set of 16, 1.66 x 5.2" 45* Ferrea SS 6000 series valves $75.00
1 set of 16, Comp 919 springs with retainers $125.00
U/D 310/314 solid roller cam. $200.00
Above prices plus shipping.
Or all for 475.00 shipped

Have any pics of the valves? Why did you change them out?

I can take some pics.
I switched to this roller set up last season from a flat solid.
I sold the KRE heads this winter with the original flat cam stuff and now have the roller stuff left over.
I am going to be running Wenzler heads this season.

Sold. Thanks PY.