WTB: 75-81 T/A SHEET METAL, FENDERS, QUARTERS, TRUNK
 

I'm looking for Pretty much anything I can get my hands on as far as sheet metal goes. I live in Pa and barely anybody ships their stuff. I'm willing to drive a bit, but it has to be worth it. I'm looking for FULL rear quarters, Fenders Left and Right Trans am preferably. and a trunk pan. I'll take anything from 75-81. I'm hoping the condition is relatively good, mainly the normal rust spots I need not to be rusted. Let me know what ya got and I'll let ya know. Pictures preferable

Thanks
Brian

I'm stripping a 1980 4-speed T/A next weekend. All body panels are good. I'm off of the NYS Thruway (rt 90) exit 47. Would that be too far a drive?

TA parts
 

Did you find fenders and trunk pan. Im near Kansas City,Mo, Have good driver fender and fair passenger (NO RUST) . Trunk pan has no rust. I would have to cut out if car. Thanks Rick

I have a couple of T/As, but the '79 Formula has GREAT front fenders, if you're still looking.

Joe [email protected]

79 T/A Parts
 

I have a 79 rust-free body tub on rolling chassis. Body has been stripped of paint for frame off resto. Body is in prime ready for paint. Frame is done has 4-wheel disc brake rear. LH quarter was damaged and removed $750 Have rustfree clean doors for $200@ and rustfree clean T/A fenders for $275@. In Milwaukee,WI If interested we can be reached at 414-466-2300

NOS TA QUATER PANEL PLUS
 

AVAL LFT NOS 1/4 GM PART ALSO MANY OTHER PARTS AVAL.
EMAIL DIRECT WITH LIST OF NEEDS~~
[email protected]

I have a 79' t/a fender driver side $175 i will ship,I have a 70-76 t/a hood also $300 i will ship also.

Hey all I just want to update this post a bit, I found some Sheetmetal that I needed as far as fenders and such go so thank you for your posts and such. I hope other found what they needed from you guys too. But now I'm in need of more metal... I know at this point I should have bought a better car, but where would the fun be in that??? Anyways, here's what I need...

Rear Tail Panel for 75-77
Trunk floor pan 75+
Rear bumper (the metal parts)
Rear frame rails, both sides
and of course the passenger rear seat floor board

Oh and if anybody has any pictures of what their frame rails in the back look like or the bottom of the rear tail panel I would like to see them so I know what it should look like...mine..well isn't there sadly. Thank you for your help

-Brian

Ok new parts list...

Rear Frame Rails both sides
Trunk Pan Supports
and Complete floor boards both sides


if you have any of this and want to get rid of it (and you ship unless local) please PLEASE let me know! I'm so close to finishing its killing me!

I'm pretty sure, I have a nice set of rear frame rails. It is going to be at least a week before I can get them out of the car.This body has been stored up in the air on a 53 Ford truck chassis for over 25 years. I also have all new front and rear suspension for it. It is a combination of Herb Adams (VSE) and Rancho performance springs and shocks, with all new Moog suspension parts. It also has a nice interior. It is actually a 74 Trans Am. My book shows 75 and 75 the same. If I can help in any way, please drop me a line at [email protected] I am in Lower Michigan, and can ship the parts if needed.

THANK YOU for your time, and consideration !!
Kindest Regards
Brian 989-291-5075