PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   68-69 GTO Tempest & LeMans TECH (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=433)
-   -   OHC six (https://forums.maxperformanceinc.com/forums/showthread.php?t=630994)

U47 04-18-2010 06:48 PM
OHC six
 
Can anyone help with the OHC bellhousing bolt up. Is it Chevy or Pontiac?

Don

Jeff Hamlin 04-18-2010 07:02 PM
Pontiac w/Starter on the PS so a V8 bell will not fit/work.

U47 04-18-2010 07:27 PM
Quote:
Originally Posted by Jeff Hamlin (Post 3967808)
Pontiac w/Starter on the PS so a V8 bell will not fit/work.
OK let me try again Ive got a 250" Chevy six with a T-350 A/T and want to run a Pontiac OHC six. Do the two engine have the same bell housing bolt pattern? Sounds like you said same as chevy.

Don

Jeff Hamlin 04-18-2010 07:41 PM
I think because the starter is on the PS of the OHC the chebby stuff may not fit/work.
I can't say I'm 100% correct. Is the Chev 6 starter on the PS?

I would go over to the OHC board to ask further. (link below)

http://sohcsix.yuku.com/

U47 04-18-2010 09:05 PM
Quote:
Originally Posted by Jeff Hamlin (Post 3967849)
I think because the starter is on the PS of the OHC the chebby stuff may not fit/work.
I can't say I'm 100% correct. Is the Chev 6 starter on the PS?

I would go over to the OHC board to ask further. (link below)

http://sohcsix.yuku.com/
OK Jeff thanks, will switch over. BTY starter is on the rt side.

Don


All times are GMT -4. The time now is 06:36 PM.