PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   Members Helping Members (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=486)
-   -   Need bumper moved from Houston to Dallas (https://forums.maxperformanceinc.com/forums/showthread.php?t=649005)

crustysarge 11-05-2010 06:34 AM

Need bumper moved from Houston to Dallas
 
I am overseas right now and found a rear bumper for my 79 Bonny at a salvage yard north side of Houston and need it taken to a shipper in Grand Prairie 75050 between Dallas and Ft. Worth. Yard won't ship. Any ideas on cheap way to get it up there? Would be the bumper laying on the ground most likely, doubt he will do anything other than maybe a pallet. Help!

gregneun 11-05-2010 09:56 AM

bumper shipping
 
A used bumper could be shipped by Greyhound freight without too much fear of major damage. A sturdy and oversized item like this an ideal item to use greyhound. A well attached toe-tag is all that may be required for labeling.

Maybe a local member could assist you in getting the bumper to the station and a family member or friend could pick it up at the destination station. They only ship station to station.

Just a thought,
Greg

6x400gmc 11-05-2010 10:00 AM

When do you need it in Dallas? I live on the SE side of Houston, and I plan on heading to Dallas for Christmas.

Britt

crustysarge 11-05-2010 02:34 PM

Sometime next week, buddy has a container leaving from there in about 10 days. I was trying to find one them "hotshot" guys that go back and forth. Wonder if I could do FEDEX or UPS ground pickup. A complete bumper assembly is probably abut 70-80 pounds I figure.

ftwmlp 11-05-2010 05:49 PM

I live in the area between Dallas and Fort Worth. If you can find someone to meet me half way in between there and Houston I can do that no problem. If you get up against it and still can't find some way to get up here, I might be able to take off work a day and make the run.
Mike Pearson

crustysarge 11-07-2010 03:26 PM

Thanks for the offer Mike. I am going to try and get the yard to take it to Conroe to the bus station. Does anybody know if the parts has to be wrapped or just tagged for Greyhound?

78savette 11-08-2010 02:12 AM

If Greyhound doesn't work out for you, let me know, I may have another option if you need it, I have a good friend that goes back and forth from here (Houston) to Dallas a couple times a week in his eighteen wheeler to pick up construction equip., bet I could get him to pick up your bumper and deliver it (especially if where he goes is around where you need it dropped), let me know and I'll ask him for you.

69gp400 11-08-2010 05:32 PM

i would bubble wrap the bumper or at least use brown shipping paper.

ftwmlp 11-09-2010 02:26 PM

The Fort Worth Greyhound terminal is six blocks from my office. I could certainly pick it there and take it to Grand Prairie for you.

crustysarge 11-09-2010 02:54 PM

Thanks guys, I am going to call the yard tomorrow and see what I can get done.

Kyflier 11-09-2010 10:49 PM

Wish I had seen this earlier, my brother n law and sister drove from Houston to Dallas today. I could have gotten it there for you. Let one of us know, we'll get it there somehow

crustysarge 11-12-2010 01:55 PM

Yard says it is rusted, could not get a detemrination of it is only surface or not. Crap.

crustysarge 11-12-2010 05:23 PM

With no comittment to pick up or ship, is there anybody that could go look at this and see if it is bad or not? Charlies Auto Salvage in Tomball by the Woodlands.

SK68GTO 11-16-2010 09:02 AM

I just ran across this, you still need someone to look at it? I can do it and email you pics. if you need.
Scott


All times are GMT -4. The time now is 01:15 PM.