TATA Head Bolts
 

Does anyone have photos or know what 78' or 79' w72 head bolt markings look like?

I had two on my TATA that had damage from someone putting exhaust bolts in that were too long so I bought a set off Ebay, supposedly a factory set from a 78' w72. The 78' head markings were different and had one more studded bolt than the ones pulled from the 79'. I'm trying to determine what would be correct for the TATA.

Thanks
tltw72

are you talking about the cylenderhead to block bolts? I have an all original 400 from a tata in my shop

Yes. I would appreciate it if you would check and see what head markings they have.

Replaced my 30 yr old head bolts with AARP when I rebuilt the engine on my 78 TA 6.6

should have three studed head bolts drivers side one on the passenger. the others have a circle on top of the bolt. hope this helps