1964 INSPECTORS GUIDE
 

Any interest for a copy of the 1964 fullsize pontiac guide book. getting a cost in a few days. Have no idea where i got this one but nobody sells them or heard of one. Also can the hobby use more wheel studs for the 8 lug drums.I received only one request since sept.and that was Jeff Miller from Roush racing. would need to order 2000 for a good price. thanks let me know. John

John - I would probably be interested in one -

(PS - I would not recommend that you put that '64 wood wheel in the wash machine. They tend to shrink during the spin cycle).

K

I would buy a reprint.

I'll like to have a copy. I'll take 32 studs and 12 oil filter labels. Let me know the cost Thanks John..

Andre, I have the pf-7 oil filter labels set aside for you, still waiting for a cost on printing the inspectors guide. Thank you! John

Vince,facts and part numbers that where on the assembly line, measurements of frames, crayon color markings on the frames. Some items like the radiators had a production line number different from the parts book. correct markings on the drive shaft . part numbers for springs and shocks on different optioned cars etc. John

John, I would be interested in a reprint.

John:

I would be interested in a reprint or a copy as well.

1964 Inspectors guide
 

$70.00 set up charge for the 1964 inspectors guide and a $7.50 cost per book. min of 20, about 14.50 ea not counting shipping/tax, with weak interest not worth going forward. Same said for the 8lug wheels studs. John

Count me in for 1..if you do go forward.

Id be interested in one too if you do move forward with it

8-LUG have you thought about asking the hosts if they would buy a few cases? Bet they would sponsor an order of 25, and the printer might have a few extras... just a thought.

Count me as well...whether you reprint or just copy... I'm in.

PF-7 filter labels...pm me how much..the 8-lug studs - are the RH or LH and how much? Include that in your pm.

I would be interested in a copy also.

You might get ahold of 1973Formula on PY.
He could make a PDF copy of it, probably.

:)

John, sell them for $20 each, shipped. Maybe a price break if people order more than one?

At that price, add me in for two copies of the inspector's guide.

Thanks, John!

That is a very cool booklet.

:)

I'd take a book.

Anyone know which wheel stud I could get that is about 1/4" longer than the factory stud on a stock 5-lug rear axle?

Im in if you go with it