PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   Suspension TECH (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=421)
-   -   Rear End Swap!!! (https://forums.maxperformanceinc.com/forums/showthread.php?t=691023)

Tinindian6702 02-23-2012 03:45 PM

Rear End Swap!!!
 
Hi,

Can anyone tell me if a 1978 Stock firebird rear will fit in a 67 stock firebird??

Thanks,
Mike

b-man 02-23-2012 05:56 PM

Quote:

Originally Posted by Tinindian6702 (Post 4560274)
Hi,

Can anyone tell me if a 1978 Stock firebird rear will fit in a 67 stock firebird??

Thanks,
Mike

Not without moving the spring pads (cutting and welding).

limejudge69 02-23-2012 09:20 PM

B-man is correct. It will fit, but only after some spring perch mods. Your best bet is to find an 8.5 out of an early 70's Nova. It's a direct bolt in. I did this on my 67 Bird. The brakes will also swap over. The only other issues are a conversion u-joint, and shortening the driveshaft. Try eBay, racing junk, Craigslist, or some Camaro forums. The 10 bolt 8.5 isn't too tough to find and should be relatively cheap. I got mine for $150.

Tinindian6702 02-23-2012 09:59 PM

Thanks for the response. What advantage would there be for upgrading to a 12 bolt rear?? Not looking to race just a nice cruiser.

b-man 02-23-2012 10:09 PM

For a cruiser, none.

The 8.5" 10-bolt rivals the strength of the 8.875" 12-bolt rear, they both actually use the same pinion bearing.

Tinindian6702 02-23-2012 10:54 PM

Thanks for the advice

67drake 02-24-2012 01:55 AM

Quote:

Originally Posted by Tinindian6702 (Post 4560632)
Thanks for the response. What advantage would there be for upgrading to a 12 bolt rear??

Your wallet will be lighter.
8.5's are great rear ends,and a lot cheaper than the 12 bolts you see for sale.


All times are GMT -4. The time now is 03:07 PM.