PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)

- 61-77 GTO LeMans & Tempests FOR SALE (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=460)

- - 1968 Tempest 2-dr OHC-6 (https://forums.maxperformanceinc.com/forums/showthread.php?t=691999)

1968 Tempest 2-dr OHC-6

So I'm finally selling my 1968 Tempest.

Some points about the car:

- Body is in great shape with minimal rust, but in the typical places (lower quarters, rocker panels, rear floor pan, windows)

- OHC-6 with 97k miles, power steering (no power brakes), Automatic. Engine runs good but would need a rebuild if you plan on any serious driving with it.

- Interior is in good shape, needs new headliner, carpet, and a few minor things

- No A/C

- A lot of new small parts and minor work has been done.

It's basically ready to be restored or turned into a GTO clone (whatever suits you). Ask any questions here, PM if you're interested, I'll give a whole list of work that's been done to anyone interested. I have more photos to upload (and I can take more upon request). Also I have a video of it running, so if someone wants to see it I'll throw it on youtube.

Asking $6,000.

(side note: also selling a '78 Vette along with this. PM if interested)

- Majority of the chrome on the car is in excellent condition, especially the bumpers.

- Trunk has no holes in it, only light surface rust.

Questions or comments, feel free to ask.

Does the car have any rust in the rockers? Any pics?

Does it have disk brakes up front or just drum?

2-speed auto?

Yes there's rust in the rockers. The rockers, quarters, etc are areas that can be patched due to the limited area of the rust. I will pull off the chrome and get some pictures of the rust in the rockers, quarters, etc within a day or two.

Drum brakes up front, and we replaced the cyclinders in them a few months ago.

It has the 2-speed auto, which shifts smooth and hasn't had any problems.

I've been needing to update with more pics and info. So here's some more:
- The front half of the floor pan is fine with minimal surface rust
- The rear half has holes (the ones shown, plus a few under the rear seat).
- I'll also be throwing in a few extra parts, such as the original steering wheel and a 4bbl intake from a Sprint.

jdw_poncho, here are a few pics of the rocker panel rust.