A little something I have been working on
 

Compare to the grainy photo I worked off from:

http://forums.maxperformanceinc.com/...5&d=1356373232

http://forums.maxperformanceinc.com/...4&d=1356372974

Finished product. I printed it on Avery adhesive back paper decal material. This might have been what GM used in 1977. Life expectancy about 6 months.. LOL

http://forums.maxperformanceinc.com/...5&d=1356393837

Maybe a year in a controlled environment, lol. Looks like you did a nice job especially considering what you had to use for a reference.

Nice detail!

Thank you!

Nicely done!

Nice Job!

I tweaked the dimensions of the decal, and it fits much closer to the factory photo:

http://forums.maxperformanceinc.com/...9&d=1356651528

I made a decal for my GTO:

http://forums.maxperformanceinc.com/...0&d=1356651567

http://forums.maxperformanceinc.com/...1&d=1356651601


I am in the process of making a power steering pump code decal for it, since I found what was left of the original.

What the decal is supposed to look like:

http://forums.maxperformanceinc.com/...2&d=1356659811

The power steering pump code DS on a sample 1973 GTO build sheet:

http://forums.maxperformanceinc.com/...3&d=1356659827

This inspection decal is still present on my 1973 Y6 code 2nd design emissions 4 speed 400 Grand Am:

http://forums.maxperformanceinc.com/...9&d=1356786748

These were easy to reproduce.:usa2:

Viola!

http://forums.maxperformanceinc.com/...8&d=1356801077

Thanks to Stewart, I was able to correct this problem:

BEFORE:

http://forums.maxperformanceinc.com/...4&d=1356994570

AFTER:

http://forums.maxperformanceinc.com/...5&d=1356994585

So you no longer could use a pic of the one in my Can Am?

I'm all set with that decal..However, if you have a chance, could you please look at your master cylinder for the very small two letter code stamped on the foward machined boss where the brake line is threaded into. Thank you.

http://forums.maxperformanceinc.com/...8&d=1330905209

6 349 is the Julian date code (349th day of 1976, correct for a 1977 model). DD is the code that should be on the broadcast sheet.

Revisited this project. Many hours went into the size, and fonts. Perfected the process as these are laminated and adhesive backed:

http://forums.maxperformanceinc.com/...5&d=1357408563

Compare to the tattered original off my R89WP battery:

http://forums.maxperformanceinc.com/...7&d=1357408665

And this service replacement Z89 battery:

http://forums.maxperformanceinc.com/...8&d=1357408684

With the good printers and label materials available today, it might be better to DIY some of these labels rather than have them commercially made and GM licensed.

Finished..

GTO:

http://forums.maxperformanceinc.com/...3&d=1357429787

Can Am:

http://forums.maxperformanceinc.com/...4&d=1357429806

Many thanks to board member Brewster. I finished these today.

https://sphotos-b.xx.fbcdn.net/hphot...08282370_o.jpg

https://sphotos-a.xx.fbcdn.net/hphot...17019509_o.jpg