|
67 battery tray...is there a repop thats close?
If there is one thats close I could modify it to fit. Its not a going to be a points show car, just a driver. I dont mind welding on ears to bolt on etc. Is a 65-66 or 68-69 close in size? Wonder if a 67 Impala tray would fit and if its being repopped?
|
Aron, I think I have a good original that just need bead blasted. I will get a couple pictures tomorrow and post them.
Lyn. |
|
5 Attachment(s)
Let me know if this is it?
|
This is what a '67 tray looks like:
http://www.slyagent.com/67cat/PDRM0153.JPG http://www.slyagent.com/67cat/PDRM0154.JPG |
Hmmmm....guess thats not it Lyn. Thanks Ben. Wonder if its close enough in size to modify?
|
the 68 looks the same as the 67 pictured. These are not being reproduced so an original is the best bet. Pat
|
So 67-68 are the same but not being reproduced? Still wondering if there is one thats close enough to modify.
|
Guess this one I have may be a '66. It is close to the same, not sure if you could make it work or not.
Lyn. |
I might Lyn...can you send me the dimensions? Wonder if that angled ear would hit my inner wheel well where its supposed to. If so I could try welding tabs on the front for the other bolts.
|
Aron, It measures 11 1/4" where the two hooks go in for the hold down bracket end for end. Little over 6 3/4" wide, measures 8 3/4" wide where it bolts to the wheelwell with the little kickout.
Lyn. |
| All times are GMT -4. The time now is 08:02 AM. |