PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   Pontiac - Race (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=419)
-   -   Is..... (https://forums.maxperformanceinc.com/forums/showthread.php?t=724966)

mike leech 04-08-2013 08:07 PM

Is.....
 
Everybody else thrashing as hard as I am to try and get out there? Been quiet here lately.

400 plus 04-08-2013 08:15 PM

Yes! :)

9secdport 04-08-2013 08:18 PM

You got that right!

blueghoast 04-08-2013 08:20 PM

I am, I got my little tempast wagon going I've been
driving the s!!t out of it.
I'm also thrashing on the 2-door tempest should
have it out this month and douing some T-T at
Martin dragway. So damb close.

GT.

russ467 04-08-2013 08:27 PM

soon as the machine shop gets done fixin my junk, I will commence to thrashing!

60man 04-08-2013 08:29 PM

Of course Mike....went out Saturday for a couple of shake down passes and now have more chit to do..:)

Hooter 04-08-2013 08:44 PM

Hoping to dyno Saturday and then work on front suspension once mtr is back in. Gonna be busy next couple of months.

slowbird 04-08-2013 08:47 PM

Quote:

Originally Posted by Hooter (Post 4897757)
Hoping to dyno Saturday and then work on front suspension once mtr is back in. Gonna be busy next couple of months.

Cool! Good luck!

bankbook 04-08-2013 08:50 PM

Getting close for sure.
Definitely been busy

LiL Jack 04-08-2013 08:50 PM

My junk is in the trailer and will be out this weekend, going to try and get both guns a blazing this weekend and try a couple things.

slowbird 04-08-2013 08:53 PM

Quote:

Originally Posted by mike leech (Post 4897710)
Everybody else thrashing as hard as I am to try and get out there? Been quiet here lately.

Feeling that wheels up launch the first time out makes all that hard work well worth it!!! Good luck!!!!!

Jeff Kinsler 04-08-2013 09:00 PM

yep.

wiring done. check
narrow rear. check
lower rear of car. check
install nitrous progressive. check
put motor in car. check
mount new old Mickeys. check
ordered all nitrous stuff. check


still to do.
install Trans and converter
mount nitrous bottle bracket
install plate and purge
install anti roll bar

get testing in 3 weeks. I hope. :)

mike leech 04-08-2013 09:01 PM

just ran lash. gotta drop in the distributer and plugs and she will be ready for the dyno. drop her off am and dyno wednesday am. Motor got a "paint" job too...

Jeff Kinsler 04-08-2013 09:03 PM

Quote:

Originally Posted by Hooter (Post 4897757)
Hoping to dyno Saturday and then work on front suspension once mtr is back in. Gonna be busy next couple of months.

that's cool.. good luck

Jeff Kinsler 04-08-2013 09:04 PM

Quote:

Originally Posted by mike leech (Post 4897779)
just ran lash. gotta drop in the distributer and plugs and she will be ready for the dyno. drop her off am and dyno wednesday am. Motor got a "paint" job too...

you ain't messing around.. feels like I'm slacking. lol

Jeff Kinsler 04-08-2013 09:14 PM

Quote:

Originally Posted by mike leech (Post 4897779)
just ran lash. gotta drop in the distributer and plugs and she will be ready for the dyno. drop her off am and dyno wednesday am. Motor got a "paint" job too...

1000 or bust.. :first:

mike leech 04-08-2013 09:18 PM

Quote:

Originally Posted by Jeff Kinsler (Post 4897798)
1000 or bust.. :first:

probably bust. pumping it on a rainy day. Just cant wait any longer...

Brent Flynn 04-08-2013 09:20 PM

yep... Just finished putting in new Butler pushrods... Goin to alignment shop on Thurs, to install the new adjustable outer tie rods, and reset toe... rest of alignment already done, on all new suspension. Installed new fuel reg, and did a little re-plumbing(more to do)... just gotta change oil, new plugs, and clean it up. Serviced trans and replaced missing shifter arm seal(leaked since 2005)... not a drip on the floor, now. Shooting for the 1st 10second timeslip , for the 'Bird, a week from this Wednesday...

02Hawk 04-08-2013 09:25 PM

Waiting for my junk to get assembled....needing wristpins....Pistons from Ross took 2 and half months....then in the car...4 weeks to opening day....

Although with all this global warming....or freezing...coldest day on record here in April...-20C here this morning and below normal for the next 2 to 3 weeks.....we could be weather delayed.

SupergasDil 04-08-2013 09:29 PM

Yes,,,,,
64 Gasser, mounted a line lock yesterday. Tomorrow I'll re route the lines to it and back out along with the wiring. Drag Racing this Saturday at the Tulsa Pontiac Nats.

66 GTO, my brother Darren just thanked me for helping build his 65 Gasser with a $1,500 gift card to Summit Racing for my up coming 50th Birthday. Friggin 50 man. All I can say is I'm glad I still feel and think like I'm 30. Anyway, I just ordered everything I needed to get her going again. Hope to have it rolling this month.


All times are GMT -4. The time now is 12:46 PM.