PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   67-69 Firebird TECH (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=432)
-   -   67 Firebird front bumper question (https://forums.maxperformanceinc.com/forums/showthread.php?t=737001)

Badss540 09-13-2013 09:17 AM

67 Firebird front bumper question
 
Hi guys, I'm sending the bird out for paint tomorrow and I'm trying to find out if I have a factory front bumper or not.The bumper I have is stamped Made in Canada,has two weld beads about 6 inches from the center both top and bottom and measures 1/10 th of an inch thick. The cost to re chrome is $350.00 and an aftermarket is $249.00 so if its factory I'd rather re chrome it,but if its aftermarket I'd rather buy one for $100.00 less. Any ideas,thanks

silverbullet07 09-13-2013 05:40 PM

It factory if stamped made in Canada

frankyboy455 09-13-2013 06:56 PM

just like silverbullet07 said...Made in Canada means factory original.

Badss540 09-13-2013 07:17 PM

Thanks Guys

Cammer-6 09-13-2013 08:07 PM

I dont remember any welds inside a factory one
perhaps its been repaired.Make sure the soften the edges a little bit
as thats normally where it will start to peel in a few years

Badss540 09-13-2013 08:57 PM

Quote:

Originally Posted by Cammer-6 (Post 5020470)
I dont remember any welds inside a factory one
perhaps its been repaired.Make sure the soften the edges a little bit
as thats normally where it will start to peel in a few years

My thoughts were also a repair,but I think going with the factory bumper is way better then an aftermarket one,plus I'd have to drill the holes for the 400 bumper.


All times are GMT -4. The time now is 07:48 AM.