'63-'66 Oil Pressure Sending Units for Rally Gauge
 

I am selling modified oil pressure sending units for the '63-'66 oil pressure rally gauge. These are for B-Body cars ONLY and operate at 0-31 ohms. This part is not re-popped, and NOS units are scarce and costly.

The new part is opened, rewound, resealed and painted a silver cadmium color to replicate the appearance of original units. You will need to change the gauge wire end from a stud/nut style to a spade style. No need to send me a gauge to modify unless you bought the common 93 ohm version that won't work on 63-66 cars. In that case, ship your part to me to modify.

'63 is 80 PSI
'64-'66 is 60 PSI

Cost is $100 and includes shipping within the continental U.S.

PM with requests. Payment can be via money order, or Paypal.

Matt

id like to see pics of the finished product

There's a pic of the first one I made if you go to this thread: "65-66 oil pressure sending unit DIY mods". Look at the first post. It doesn't look like the short dome top versions that came on the cars, just a typical transducer with modified guts that'll work on 63-66 cars.

Linky:

http://forums.maxperformanceinc.com/...+unit+DIY+mods

ok..looking for something that looks more factory like

Hi Matt-
Any progress on these sending units?

I had a SNAFU awhile back and learned that only a specific Delco sender was right for modification…the same one I had been modifying before. I thought I could use any brand as long as it was 60 psi…wrong. I've since bought a few correct senders from ebay and will use them for customers wanting one of these. Now that fall cleanup and deer hunting is over, I can get some made up and shipped out this month.