door edge guards
 

Over the years I have acquired these NOS Pontiac (pretty sure) door edge guards but I do not know what they fit. Any help recognizing them would be great. They were made by Adell who made door edge guards for Pontiac and they were required by Pontiac to have the mounting tabs
Joe

I'm going to guess '69-70 B-body (big car) for the third pic, based on the contour and the spot with the relief cut out of the back to go over the sharp crease low on the door.

4th picture is 63/4 "B" body 2 door.

door edge guards
 

thanks so far
Joe

Factory edge guards for gen1 Firebirds have a 1" notch in the back of the stainless right at the belt line. That's one way to recognize them.

still trying to ID pictures 1 & 2

1st Pic could easily be '65-6 2 door B body

For reference...none of those are F body (1st or 2nd gen).